Re: Horizontal to vertical?

John,
That's the exact one I have 3rd item down on that page.
-Lee

--- In CAD_CAM_EDM_DRO@y..., "John H." <johnhe-uk@s...> wrote:
> How about something more like an angle adapter like this
> http://www.victormachines.com/accessories.html
> This sort of adapter works by clamping onto a static shaft with the
collar
> and the spindle passing inside doesn't it?
>
> Thanks again,
> John H.
>
>
> > Hi John,
> > Sounds like too much of work, but... an idea...
> > Enco has a bridgeport right angle R8-to-R8 adapter for vertical
mills
> > that clamps to the quill to make it R8 horizontal. It comes with
an
> > arbor and support too. Something like this might be adaptable to
> > the horizontal mill with care to keep things square. Its also R8
> > driven, so you will need to get an adapter to whatever the arbor
> > drive is and make a mounting bracket so it wont spin.
> > Sounds like a lot of work. I've seen these on Ebay too.
> >
> > I've got one, and its for a quill thats 1" smaller circumference
than
> > my mill so I need to make an adapter.
> >
> > -Lee
> >
> >
> > --- In CAD_CAM_EDM_DRO@y..., "John H." <johnhe-uk@s...> wrote:
> > > Hello,
> > >
> > > Since you can change a vertical mill over to horizontal, is
it
> > possible
> > > to change a horizontal over to vertical? It doesn't matter if
the Z
> > on the
> > > head feature is sacrificed in the process since it's a knee
mill.
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >