CAD CAM EDM DRO - Yahoo Group Archive

Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math

on 2002-02-25 23:17:25 UTC
Ok Ok...seriously...which is it?

I want to send 2000 pulses from the LPT to get one revolution from a
motor that is stepping 2000 times per revolution.
(not sure I even needed the 210's for this)

Sean



--- In CAD_CAM_EDM_DRO@y..., JanRwl@A... wrote:


> Duh... SORRY! I meant "with the jumper in the X1 position, you
send 200
> step-pulses to the driver for one revolution". (With the jumper
in the X10
> position, you send 2000 pulses to the driver for one revolution).
SORRY!
> JRR

Discussion Thread

Paul R. Hvidston 2002-02-25 12:34:23 UTC Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math Paul R. Hvidston 2002-02-25 12:53:06 UTC Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math Guy Sirois 2002-02-25 12:56:03 UTC RE: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math Paul R. Hvidston 2002-02-25 13:02:35 UTC Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math mariss92705 2002-02-25 15:14:13 UTC Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math Paul R. Hvidston 2002-02-25 17:10:56 UTC Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math Guy Sirois 2002-02-25 17:26:47 UTC RE: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math mariss92705 2002-02-25 19:14:09 UTC Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math JanRwl@A... 2002-02-25 22:27:14 UTC Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math JanRwl@A... 2002-02-25 22:30:34 UTC Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math mariss92705 2002-02-25 22:45:54 UTC Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math JanRwl@A... 2002-02-25 22:58:24 UTC Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math audiomaker2000 2002-02-25 23:17:25 UTC Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math the_dutros 2002-02-26 05:58:05 UTC Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math rsgoldner 2002-02-26 06:06:55 UTC Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math mariss92705 2002-02-26 07:56:17 UTC Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math JanRwl@A... 2002-02-26 09:43:23 UTC Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math Russ Revels 2002-02-26 17:08:27 UTC Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math wanliker@a... 2002-02-26 18:32:38 UTC Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math Raymond Heckert 2002-02-26 19:48:36 UTC Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math Daniel J. Statman 2002-02-26 19:52:56 UTC Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math cdoughtynz 2002-02-26 20:31:14 UTC Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math