Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
Posted by
the_dutros
on 2002-02-26 05:58:05 UTC
The user manual (in .PDF format) is available for the the G201 and
the G210 at www.geckodrives.com.
Briefly, the G210 is the same as a G201. The difference is the G210
adds a "multiplier" circuit.
Per the manual, "this circuit puts out 1, 2, 5, or 10 pulses for
every INPUT step pulse."
So, if you want 2000 LPT pulses to make ONE revolution, you would
select the "1X" jumper setting on the G210.
OR, you can save $40 and get a G201 -- this is EXACTLY what the G201
does right out of the box.
-DASH
--- In CAD_CAM_EDM_DRO@y..., "audiomaker2000" <audiomaker@s...>
wrote:
the G210 at www.geckodrives.com.
Briefly, the G210 is the same as a G201. The difference is the G210
adds a "multiplier" circuit.
Per the manual, "this circuit puts out 1, 2, 5, or 10 pulses for
every INPUT step pulse."
So, if you want 2000 LPT pulses to make ONE revolution, you would
select the "1X" jumper setting on the G210.
OR, you can save $40 and get a G201 -- this is EXACTLY what the G201
does right out of the box.
-DASH
--- In CAD_CAM_EDM_DRO@y..., "audiomaker2000" <audiomaker@s...>
wrote:
> Ok Ok...seriously...which is it?a
>
> I want to send 2000 pulses from the LPT to get one revolution from
> motor that is stepping 2000 times per revolution.
> (not sure I even needed the 210's for this)
>
> Sean
Discussion Thread
Paul R. Hvidston
2002-02-25 12:34:23 UTC
Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
Paul R. Hvidston
2002-02-25 12:53:06 UTC
Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
Guy Sirois
2002-02-25 12:56:03 UTC
RE: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
Paul R. Hvidston
2002-02-25 13:02:35 UTC
Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
mariss92705
2002-02-25 15:14:13 UTC
Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
Paul R. Hvidston
2002-02-25 17:10:56 UTC
Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
Guy Sirois
2002-02-25 17:26:47 UTC
RE: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
mariss92705
2002-02-25 19:14:09 UTC
Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
JanRwl@A...
2002-02-25 22:27:14 UTC
Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
JanRwl@A...
2002-02-25 22:30:34 UTC
Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
mariss92705
2002-02-25 22:45:54 UTC
Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
JanRwl@A...
2002-02-25 22:58:24 UTC
Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
audiomaker2000
2002-02-25 23:17:25 UTC
Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
the_dutros
2002-02-26 05:58:05 UTC
Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
rsgoldner
2002-02-26 06:06:55 UTC
Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
mariss92705
2002-02-26 07:56:17 UTC
Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
JanRwl@A...
2002-02-26 09:43:23 UTC
Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
Russ Revels
2002-02-26 17:08:27 UTC
Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
wanliker@a...
2002-02-26 18:32:38 UTC
Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
Raymond Heckert
2002-02-26 19:48:36 UTC
Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
Daniel J. Statman
2002-02-26 19:52:56 UTC
Re: Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math
cdoughtynz
2002-02-26 20:31:14 UTC
Gecho 210 step multiplier, was Re: [CAD_CAM_EDM_DRO] Stepper Math