CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] vfd

on 2002-03-06 05:46:10 UTC
Quit sending me this bullshit



At 01:38 PM 3/6/02 +0000, you wrote:
>Hugh,
>
>
>
>The VFDs do rectify input voltage to DC. The input can be single or 3
>phase. They then use a 3-phase bridge inverter to create a new 3 phase AC
>with varying voltage and frequency. The inverter uses pwm and the waveform
>is filtered to a smooth AC voltage.
>
>
>
>
>
>_________________________________________________________________
>MSN Photos is the easiest way to share and print your photos:
>http://photos.msn.com/support/worldwide.aspx
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>OFF Topic POSTS: General Machining
>http://www.metalworking.com/news_servers.html
>http://www.metalworking.com/news_servers.html
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Discussion Thread

snokket 2002-01-10 12:52:48 UTC New member new to cnc. j.guenther 2002-01-10 13:07:09 UTC RE: [CAD_CAM_EDM_DRO] New member new to cnc. Scot Rogers 2002-01-10 13:08:25 UTC vfd snokket 2002-01-10 14:27:59 UTC Re: New member new to cnc. ballendo 2002-01-11 17:31:00 UTC Re: New member new to cnc. Alan Marconett KM6VV 2002-01-11 23:06:10 UTC Re: New member new to cnc. ballendo 2002-01-12 05:48:50 UTC alum. box "table" for sherline was Re: New member new to cnc. snokket 2002-01-13 14:50:06 UTC Re: New member new to cnc. ( Thanks ballendo ) ballendo 2002-01-16 05:57:51 UTC Re: New member new to cnc. ( Thanks ballendo ) snokket 2002-01-16 14:23:52 UTC Re: New member new to cnc. ( Thanks ballendo ) tom mazz 2002-03-06 05:38:41 UTC vfd Richard Rogers 2002-03-06 05:46:10 UTC Re: [CAD_CAM_EDM_DRO] vfd Dr Brian H Le Page 2002-03-06 20:31:05 UTC RE: [CAD_CAM_EDM_DRO] vfd Jon Elson 2002-03-06 23:33:32 UTC Re: [CAD_CAM_EDM_DRO] vfd Sven Peter 2002-03-07 05:39:44 UTC Re: [CAD_CAM_EDM_DRO] vfd Jon Elson 2002-03-07 10:00:32 UTC Re: [CAD_CAM_EDM_DRO] vfd Unterhausen Umberto 2002-03-07 18:24:46 UTC vfd