CAD CAM EDM DRO - Yahoo Group Archive

Re: EMC and WinNT

Posted by Karl Klemm
on 1999-12-07 09:21:29 UTC
> > You can't run a machine with EMC on WinNT. You need to use real time
> > linux. Also, to use the program you need atleast a P133, 32MB RAM,
> > 1GB HD. However, I have found that I couldn't compile the realtime
> > kernel for red hat linux 5.2 on a P166, I had to use my K6-2 300
>
> I really doubt compiling the kernel requires a fast processor. It has
> grown somewhat, but I used to build kernels on a 486SX, although it
> did take a bit over an hour. Any machine that will run EMC should be
> able to build the kernel.

This is just my expirence. I was using a P166 and I kept getting a
signal 11 about halfway through the compile. But when I stuck the HD in
my PC it worked like a charm. It may have been I just didn't have enough
RAM, or it was bad, but I'm not sure. Plus I'm very impatient so a 300MHz
processor was nice and quick.

Karl

Discussion Thread

Ron Hanson 1999-12-07 08:24:15 UTC EMC and WinNT Karl Klemm 1999-12-07 08:56:02 UTC Re: EMC and WinNT Phil Plumbo 1999-12-07 09:10:41 UTC Re: EMC and WinNT stratton@m... 1999-12-07 09:18:09 UTC Re: EMC and WinNT Karl Klemm 1999-12-07 09:21:29 UTC Re: EMC and WinNT Karl Klemm 1999-12-07 09:23:10 UTC Re: EMC and WinNT paul@A... 1999-12-07 09:36:40 UTC Re: EMC and WinNT Darrell 1999-12-07 09:42:34 UTC Re: EMC and WinNT Karl Klemm 1999-12-07 09:41:22 UTC Re: EMC and WinNT Karl Klemm 1999-12-07 09:42:39 UTC Re: EMC and WinNT Karl Klemm 1999-12-07 09:45:24 UTC Re: EMC and WinNT stratton@m... 1999-12-07 09:51:38 UTC Re: EMC and WinNT paul@A... 1999-12-07 09:54:55 UTC Re: EMC and WinNT Darrell 1999-12-07 10:07:35 UTC Re: EMC and WinNT Jon Elson 1999-12-07 13:17:47 UTC Re: EMC and WinNT Jon Elson 1999-12-07 13:23:12 UTC Re: EMC and WinNT Charles Hopkins 1999-12-07 13:30:38 UTC RE: EMC and WinNT Steve Carlisle 1999-12-07 17:30:10 UTC Re: EMC and WinNT