RE: EMC and WinNT

I just finished the required RT kernel patch using a P166
With 16 meg of ram. It would not go with 8 meg though.

Let's see what happens when I install EMC.

Update hopefully tomorrow.

Charles Hopkins



From: Karl Klemm
Sent: Tuesday, December 07, 1999 7:45 AM
To: CAD_CAM_EDM_DRO@onelist.com
Subject: Re: [CAD_CAM_EDM_DRO] EMC and WinNT

From: Karl Klemm <kklemm@...>

> From: "Terry L. Ridder" <terrylr@...>
>
> hello;
>
> signal 11 on a kernel compile is a memory problem
> not a kernel or rt-linux problem.
>

That's what I was told. However, when I swapped in some RAM that I knew
was ok, and was faster also, it didn't help, I still got the same
errors. As I said before, when I put the linux HD in my PC, which has
more RAM, it worked fine, so it may have been that for some reason I
needed 64MB instead of 32.

Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager