Re: EMC and WinNT
Posted by
Darrell
on 1999-12-07 09:42:34 UTC
The LSI-11 is the main computer board in a Bridgeport BOSS 3 through BOSS 6
CNC stepper machine. If you are going to run steppers with EMC, you do not
need one.
Darrell
CNC stepper machine. If you are going to run steppers with EMC, you do not
need one.
Darrell
----- Original Message -----
From: Karl Klemm <kklemm@...>
To: <CAD_CAM_EDM_DRO@onelist.com>
Sent: Tuesday, December 07, 1999 9:23 AM
Subject: Re: [CAD_CAM_EDM_DRO] EMC and WinNT
> From: Karl Klemm <kklemm@...>
>
> > >From: Karl Klemm <kklemm@...>
> > > Also you need an
> > >LSI 11 bus board to hook the PC up to a machine, which costs $2k,
pretty
> > >steep.
> > >
> >
> > LSI-11? I don't think so....
>
> I'm setting up a demo site for EMC, I'm a student at Worcester Polytech...
> and trying not to buy the board. I was wondering what you used?
>
> Karl
>
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
Discussion Thread
Ron Hanson
1999-12-07 08:24:15 UTC
EMC and WinNT
Karl Klemm
1999-12-07 08:56:02 UTC
Re: EMC and WinNT
Phil Plumbo
1999-12-07 09:10:41 UTC
Re: EMC and WinNT
stratton@m...
1999-12-07 09:18:09 UTC
Re: EMC and WinNT
Karl Klemm
1999-12-07 09:21:29 UTC
Re: EMC and WinNT
Karl Klemm
1999-12-07 09:23:10 UTC
Re: EMC and WinNT
paul@A...
1999-12-07 09:36:40 UTC
Re: EMC and WinNT
Darrell
1999-12-07 09:42:34 UTC
Re: EMC and WinNT
Karl Klemm
1999-12-07 09:41:22 UTC
Re: EMC and WinNT
Karl Klemm
1999-12-07 09:42:39 UTC
Re: EMC and WinNT
Karl Klemm
1999-12-07 09:45:24 UTC
Re: EMC and WinNT
stratton@m...
1999-12-07 09:51:38 UTC
Re: EMC and WinNT
paul@A...
1999-12-07 09:54:55 UTC
Re: EMC and WinNT
Darrell
1999-12-07 10:07:35 UTC
Re: EMC and WinNT
Jon Elson
1999-12-07 13:17:47 UTC
Re: EMC and WinNT
Jon Elson
1999-12-07 13:23:12 UTC
Re: EMC and WinNT
Charles Hopkins
1999-12-07 13:30:38 UTC
RE: EMC and WinNT
Steve Carlisle
1999-12-07 17:30:10 UTC
Re: EMC and WinNT