Re: [CAD_CAM_EDM_DRO] Re: +5V

Hi Dale, Meneer,

Hah! Funny you should bring these up. I'm currently getting my +5v
power from a DeskWinNC board (powered by a 9v wall wart). I don't have
the RS-232 connected, and I'm getting the +5v, which comes from the 7805
reg on the board. This is after I tied up my game port with a pendant.

Alan KM6VV


aspaguy wrote:

>
> Meneer, As I understand it, the terminal on the side of the
> deskwinNC signal generator board that is labeled +5v is an output,
> suitable for running the geckos. The diagram I have uses a 9 volt
> wallwart for the 6-12volt dc input on the end of the board and leaves
> the terminal labled +5v on the end of the board unused. I assume that
> either the +5volts comes from the serial port and is separated at the
> board or the board regulates the 6-12 volt input to 5v. I'm sure Dan
> Mauch could shed some light on this as he sells the boards.
> Hope I didn't just add confusion,
> Dale