CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] EMC and no response from M3

Posted by Jon Elson
on 2002-03-27 10:42:12 UTC
"Toddy, Terry L CUBA" wrote:

> Question for the EMC gurus. When I issue a M3 command in auto or MDI there
> is no change in the spindle state on the display. I can click on the spindle
> button and turn it on in manual mode.

Yup, I have 2 old versions, and they both have this problem. These are
20-Dec-1999 and 15-Mar-2000. What version are you running?

Jon

Discussion Thread

Toddy, Terry L CUBA 2002-03-27 08:32:53 UTC EMC and no response from M3 Jon Elson 2002-03-27 10:42:12 UTC Re: [CAD_CAM_EDM_DRO] EMC and no response from M3 Toddy, Terry L CUBA 2002-03-27 11:25:24 UTC RE: [CAD_CAM_EDM_DRO] EMC and no response from M3 Paul 2002-03-27 12:25:54 UTC Re: [CAD_CAM_EDM_DRO] EMC and no response from M3 Jon Elson 2002-03-27 23:19:01 UTC Re: [CAD_CAM_EDM_DRO] EMC and no response from M3 Paul 2002-03-28 12:32:25 UTC Re: [CAD_CAM_EDM_DRO] EMC and no response from M3 Jon Elson 2002-03-28 22:35:17 UTC Re: [CAD_CAM_EDM_DRO] EMC and no response from M3 Paul 2002-03-29 06:36:56 UTC Re: [CAD_CAM_EDM_DRO] EMC and no response from M3 Jon Elson 2002-03-29 10:45:53 UTC Re: [CAD_CAM_EDM_DRO] EMC and no response from M3 Raymond Heckert 2002-03-29 22:03:57 UTC Re: [CAD_CAM_EDM_DRO] EMC and no response from M3 Jon Elson 2002-03-29 23:32:42 UTC Re: [CAD_CAM_EDM_DRO] EMC and no response from M3 ballendo 2002-04-06 07:44:06 UTC Re: EMC and no response from M3 Jon Elson 2002-04-06 21:53:28 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC and no response from M3