Re: [CAD_CAM_EDM_DRO] EMC and no response from M3

Hi Terry

You'll need to specify a speed at the same time. i.e.

M03 S500

You can, if you want, place the M03/M04 and S words on seperate lines. The
spindle will not turn on until an S word is encountered.

Regards, Paul.

On Wednesday 27 March 2002 16:26, Toddy, Terry L CUBA wrote:
> Question for the EMC gurus. When I issue a M3 command in auto or MDI there
> is no change in the spindle state on the display. I can click on the
> spindle button and turn it on in manual mode.
>
> What's wrong?