Re: [CAD_CAM_EDM_DRO] Anti-backlash on Taig mill
Posted by
Steve Blackmore
on 2002-05-14 05:24:39 UTC
On Mon, 13 May 2002 16:07:51, you wrote:
It preloads the thread against the nut - I admit it's not "true
anti-backlash" but loosen it off and see what happens ;)
Steve Blackmore
--
Pilot Consultancy Limited ***** Computer Consultants
Telephone 01744 752256 Mobile 07831 768478
Email: steve@... WWW: http://www.pilotltd.net
>Even if the screw is tensioned, that has no effect on the lash at the nut,Not a screw - it's a nut????
>none!
It preloads the thread against the nut - I admit it's not "true
anti-backlash" but loosen it off and see what happens ;)
Steve Blackmore
--
Pilot Consultancy Limited ***** Computer Consultants
Telephone 01744 752256 Mobile 07831 768478
Email: steve@... WWW: http://www.pilotltd.net
Discussion Thread
Andrew Werby
2002-05-12 19:54:34 UTC
Re: [CAD_CAM_EDM_DRO] Digest Number 2309
thosmurray
2002-05-12 23:06:23 UTC
Anti-backlash on Taig mill was:Re: Digest Number 2309
Peter Homann
2002-05-13 00:27:22 UTC
Using a CNC Mill to tap holes?
Steve Blackmore
2002-05-13 00:54:37 UTC
Re: [CAD_CAM_EDM_DRO] Anti-backlash on Taig mill was:Re: Digest Number 2309
Marcus & Eva
2002-05-13 08:11:06 UTC
Re: [CAD_CAM_EDM_DRO] Using a CNC Mill to tap holes?
bjammin@i...
2002-05-13 08:16:58 UTC
Re: [CAD_CAM_EDM_DRO] Using a CNC Mill to tap holes?
Elliot Burke
2002-05-13 10:50:22 UTC
re:Re: Anti-backlash on Taig mill was:Re: Digest Number 2309
Steve Blackmore
2002-05-13 12:28:37 UTC
Re: [CAD_CAM_EDM_DRO] re:Re: Anti-backlash on Taig mill was:Re: Digest Number 2309
JanRwl@A...
2002-05-13 14:45:59 UTC
Re: [CAD_CAM_EDM_DRO] Using a CNC Mill to tap holes?
Jon Elson
2002-05-13 22:20:31 UTC
Re: [CAD_CAM_EDM_DRO] Using a CNC Mill to tap holes?
bjammin@i...
2002-05-14 03:48:59 UTC
Anti-backlash on Taig mill
Steve Blackmore
2002-05-14 05:24:39 UTC
Re: [CAD_CAM_EDM_DRO] Anti-backlash on Taig mill
tonyjeffree
2002-05-14 11:26:45 UTC
Re: Anti-backlash on Taig mill
Andrew Werby
2002-05-14 11:49:01 UTC
Anti-backlash on Taig mill