Re: [CAD_CAM_EDM_DRO] Re: stable EMC version?

Yes please email the file... and tell me the line # of the command in
question.
For all I know the problem could be in the decimal places used in that
single
block - or the effect of previously executed code in the program somehow
mucking
up calls to cannonical motion commands. Of course it should execute it
properly.

Les

Leslie Watts
L M Watts Furniture
Tiger, Georgia USA
http://www.rabun.net/~leswatts/wattsfurniturewp.html
engineering page:
http://www.rabun.net/~leswatts/shop.html

----- Original Message -----
From: "John Guenther" <j.guenther@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, May 20, 2002 7:23 PM
Subject: RE: [CAD_CAM_EDM_DRO] Re: stable EMC version?


> Yes, ignoring perfectly good commands and continuing on is not good. I
have
> been told that this is a known bug with the G02/G03 commands. The
> interesting problem is that with some combinations of I and J it works and
> with others it does not. The lines I provided are part of a rather long
> program to cut fan holes in the front panel of my driver box. I can
provide
> you with the complete file if you want it.
>
> John Guenther
> Sterling, Virginia
>
> > -----Original Message-----
> > From: Les Watts [mailto:leswatts@...]
> > Sent: Monday, May 20, 2002 18:30
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: Re: [CAD_CAM_EDM_DRO] Re: stable EMC version?
> >
> >
> > I have not seen such problems yet, but I realize I might.
> > I am using 2.14+ with the Servo to Go II homing bug fixed.
> > I have seen no other problems so far... but then I have just
> > started running and am mostly cutting air.
> >
> > I would like to see a current bug list for EMC- particularly the RS274
> > parser.
> > Let's find em and fix em! This one sounds like a syntax thing. If
> > the parser
> > does not like the syntax it should spit out an error message even if the
> > syntax is ok and emc has the bug. Ignoring perfectly good commands
> > but continueing program execution is a bad thing!!
> >
> > I am willing to try any reported RS274 improper command execution on
> > my machine as it is up and running with EMC closed loop servo. I will
try
> > the
> > one mentioned in MDI mode as soon as I can.
> >
> > Les
> >
> > Leslie Watts
> > L M Watts Furniture
> > Tiger, Georgia USA
> > http://www.rabun.net/~leswatts/wattsfurniturewp.html
> > engineering page:
> > http://www.rabun.net/~leswatts/shop.html
> > ----- Original Message -----
> > From: "j.guenther" <j.guenther@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Monday, May 20, 2002 1:10 PM
> > Subject: RE: [CAD_CAM_EDM_DRO] Re: stable EMC version?
> >
> >
> > > My main problem with BDI 2-12 is that certain combinations of
parameters
> > for
> > > the G02/G03 commands cause the command to be totally ignored.
> > >
> > > For example
> > > G02 X 3.3125 Y 1.5000 I-1.0000 J 0.0000 F 2.50
> > > did not work with BDI 2.12 but
> > > G02 X 29.7625 Y 0.000000 I-29.7625 J 0.000000 F 2.50
> > > did work. The last example is metric dimensions.
> > >
> > > However both of these commands work with TurboCNC.
> > >
> > > John Guenther
> > > Sterling, Virginia
> > >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > as a sister site to the CCED group, as many of the same members
> > are there, for OT subjects, that are not allowed on the CCED list.
> >
> >
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>