CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Tuning EMC

Posted by Tim Goldstein
on 2002-05-20 23:17:24 UTC
Jon,

I have the same resolution running solid at 120 ipm with only
steppermod.o. No need for a STG or your controller. That is one of the
nice things about the Gecko G3X0 drives. They don't care about the pulse
train in regard to the pacing. Now for steppers I would agree your card
is the solution.

Tim
[Denver, CO]

> At this resolution, I think you need a servo-to-go card and
> analog-input servo amps, or my universal stepper controller
> card, which will hook up to the Gecko drives. If you want
> 120 IPM feedrates, that is 10,000 * 2 = 20,000 pulses/sec per axis.

Discussion Thread

mjf462001 2002-05-19 09:14:45 UTC Tuning EMC Nic van der Walt 2002-05-19 19:58:48 UTC Servo drivers Jon Elson 2002-05-19 23:19:41 UTC Re: [CAD_CAM_EDM_DRO] Tuning EMC Jon Elson 2002-05-19 23:33:21 UTC Re: [CAD_CAM_EDM_DRO] Servo drivers Nic van der Walt 2002-05-20 02:31:49 UTC RE: [CAD_CAM_EDM_DRO] Servo drivers Jon Elson 2002-05-20 09:31:23 UTC Re: [CAD_CAM_EDM_DRO] Servo drivers mjf462001 2002-05-20 20:43:45 UTC Re: Tuning EMC Tim Goldstein 2002-05-20 20:48:51 UTC RE: [CAD_CAM_EDM_DRO] Re: Tuning EMC Jon Elson 2002-05-20 23:12:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Tuning EMC Tim Goldstein 2002-05-20 23:17:24 UTC RE: [CAD_CAM_EDM_DRO] Re: Tuning EMC Ray Henry 2002-05-21 07:01:11 UTC Re: Re: Tuning EMC j.guenther 2002-05-21 07:19:52 UTC RE: [CAD_CAM_EDM_DRO] Re: Re: Tuning EMC Jon Elson 2002-05-21 10:18:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Tuning EMC nahydro 2002-05-21 15:41:47 UTC Re: Tuning EMC Jon Elson 2002-05-21 21:43:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Tuning EMC mjf462001 2002-05-22 10:03:52 UTC Re: Tuning EMC nahydro 2002-05-22 18:24:43 UTC Re: Tuning EMC