Re: Tuning EMC

Mathew:

I'll send you the edits I made to the .ini file. They were mininal,
and are provided courtesy the kind folks here. Once I tuned a little
instability out of one G340/motor combo, the system came right up and
has proven, as near as I can tell on the bench, very stable.

r

--- In CAD_CAM_EDM_DRO@y..., "mjf462001" <mjf462001@y...> wrote:
> --- In CAD_CAM_EDM_DRO@y..., Jon Elson <elson@p...> wrote:
> > nahydro wrote:
> >
> > > For what it's worth:
> > > I'm getting 180 ipm from the BDI install on a Rise 266 with 3
> G340's
> > > using steppermod.o with what seems to me like excellent
> > > mouse/gui/motor response. Doesn't sound like a horsepower
> problem.
> > > Still on the bench here, as well.
> >
> > Maybe you need to send your .ini file to Matthew and have him try
> it.
> > He has to be doing something wrong in the setup for it to work so
> > poorly. Still, it is in good part a documentation problem. Maybe
> > the next BDI CD should have a larger selection of ready-to-run
> > .ini files included.
> >
> > Jon
>
>
> I am curious what, if any, are the advantages for a servo and gecko
> combo that is running freqmod? Is steppermod going to let me tune
all
> the same variables as freqmod?
>
> Can you tell me more about the "period" variable?
>
> If you send me a .ini file send it to mjf46@j... I would be happy
> to look it over.
>
> Thank you
> Matthew