CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Wire EDM

Posted by bjammin@i...
on 2002-05-28 07:02:58 UTC
At 01:21 PM 5/28/02 -0000, you wrote:
>reverse the wire out of the cut once a short is
>detected, then proceed back into the cut for another "bite" at the
>profile. Do your machines function in this way

My setup does. I wire limit switch thru suitable electronics to trode, so
it senses whan shorted; if so it reverses, pauses, and then continues
advancing.

>2. Why does the machine you have built need 2 passes of the wire?

Mine doesn't and few as I understand it do.

>3. What is you spark generator method? PCB, capacitors and power
>resistors?

See Jon Elson for a simple and effective EDM PS.

>4. Do you have electronics to control the recharge cycle once a short
>is detected

Nope, PS has continuous output of sufficient voltage to make continuous spark.


Regards, Hoyt


Anti-virus request: Please do not add this email addy to address books
Belfab CNC - http://www.freeyellow.com/members/belfab/belfab.html
US Best MC - http://www.freeyellow.com/members/batwings/best.html
Camping/Caving - http://www.freeyellow.com/members/batwings/caving.html
Where's Curtis LeMay when we really need him??

Discussion Thread

David Howland 1999-09-22 11:56:43 UTC Wire EDM Jon Elson 1999-09-22 13:46:43 UTC Re: Wire EDM Ian Wright 1999-09-22 14:32:58 UTC Re: Wire EDM gullo@e... 1999-09-22 21:13:38 UTC Re: Wire EDM F. de Beer 1999-09-23 00:20:01 UTC Re: Wire EDM chevalier121 2002-05-23 08:54:03 UTC Wire EDM Lalit Sahni 2002-05-24 10:25:32 UTC Re: [CAD_CAM_EDM_DRO] Wire EDM Ian W. Wright 2002-05-25 05:27:33 UTC Re: [CAD_CAM_EDM_DRO] Wire EDM Carlos Guillermo 2002-05-25 06:24:07 UTC RE: [CAD_CAM_EDM_DRO] Wire EDM chevalier121 2002-05-28 06:22:01 UTC Re: Wire EDM Steve Ross 2002-05-28 06:32:36 UTC Flashcut on a taig mill bjammin@i... 2002-05-28 07:02:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Wire EDM Dan Mauch 2002-05-28 08:34:54 UTC Dyna Myte CNC Desk Top Interface Console Andrew Werby 2002-05-28 13:39:46 UTC Flashcut on a taig mill Tony Jeffree 2002-05-28 23:24:28 UTC Re: Flashcut on a taig mill chevalier121 2002-05-29 02:43:58 UTC Re: Wire EDM turbulatordude 2002-05-29 04:13:30 UTC Re: Wire EDM Andrew Werby 2002-05-29 09:44:40 UTC Re: Flashcut on a taig mill Jon Elson 2002-05-29 10:26:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Wire EDM Jon Elson 2002-05-29 10:30:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Wire EDM tonyjeffree 2002-05-29 11:06:44 UTC Re: Flashcut on a taig mill Mark Fraser 2002-05-29 16:27:12 UTC Wire EDM paoli_60175 2002-07-08 17:26:01 UTC Re: Wire EDM Carlos Guillermo 2002-07-08 20:43:04 UTC RE: [CAD_CAM_EDM_DRO] Re: Wire EDM Jon Elson 2002-07-08 22:02:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Wire EDM John Archibald 2004-09-10 19:45:58 UTC Wire EDM Jon Elson 2004-09-10 23:07:47 UTC Re: [CAD_CAM_EDM_DRO] Wire EDM Thomas J Powderly 2006-04-03 10:43:40 UTC Re: Wire EDM Graham Stabler 2006-04-03 13:13:54 UTC Re: Wire EDM jesse Brennan 2006-04-03 14:05:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Wire EDM Graham Stabler 2006-04-03 17:55:20 UTC Re: Wire ECM jesse Brennan 2006-04-03 18:07:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Wire ECM Graham Stabler 2006-04-04 04:20:04 UTC Re: Wire ECM juan gelt 2006-04-04 08:23:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Wire ECM Graham Stabler 2006-04-04 09:00:59 UTC Re: Wire ECM