CAD CAM EDM DRO - Yahoo Group Archive

Re: Affordable ball screws

Posted by kdoney_63021
on 2002-06-18 13:53:36 UTC
I have a new retrofit kit from HiWin (www.hiwin.com) with the Yoke I
could sell you for $500. I'm using the other parts I bought for the
retrofit on another project. This is for a 9X42 table size. They have
all sizes and claim .0005/ft (http://www.hiwin.com/ballframe.html)
although mine showed up with .001 linear error(for the three feet I
tested) which I thought was excellent. You will probably have to
modify the yoke.


--- In CAD_CAM_EDM_DRO@y..., "Bailey, Paul R" <paul.r.bailey@d...>
wrote:
> Hi -
>
> New to the list, considering an ENCO machine conversion similar to
Jeff
> Davis'...
>
> Any leads (no pun intended) on affordable ball screw components/
> conversion kits?
>
> Thanks
>
> Paul Bailey
>
>
>
> [Non-text portions of this message have been removed]

Discussion Thread

Bailey, Paul R 2002-06-17 22:53:19 UTC Affordable ball screws Nic van der Walt 2002-06-18 01:20:53 UTC RE: [CAD_CAM_EDM_DRO] Affordable ball screws kaynrc 2002-06-18 05:36:04 UTC Re: Affordable ball screws hugo_cnc 2002-06-18 09:45:49 UTC Re: Affordable ball screws Christopher Morse 2002-06-18 10:45:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Affordable ball screws Jon Elson 2002-06-18 11:28:14 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws kdoney_63021 2002-06-18 13:53:36 UTC Re: Affordable ball screws afogassa 2002-06-18 15:05:40 UTC Re: Affordable ball screws wayne_j_hill 2002-06-18 21:47:59 UTC Re: Affordable ball screws Sven Peter 2002-06-18 22:01:42 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Keith Rumley 2002-06-19 05:06:30 UTC [CAD_CAM_EDM_DRO] Re: Affordable ball screws bjammin@i... 2002-06-19 06:16:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Affordable ball screws Jon Elson 2002-06-19 10:55:26 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws j.guenther 2002-06-19 11:15:56 UTC RE: [CAD_CAM_EDM_DRO] Affordable ball screws John 2002-06-19 11:27:59 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws bjammin@i... 2002-06-19 18:03:06 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Jon Elson 2002-06-19 19:39:16 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Sven Peter 2002-06-20 05:18:22 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Sven Peter 2002-06-20 05:18:54 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws gyachts 2002-06-20 09:36:33 UTC Re: Affordable ball screws kaynrc 2002-06-20 09:58:49 UTC Re: Affordable ball screws Scott M. Thomas 2002-06-21 10:55:55 UTC RE: [CAD_CAM_EDM_DRO] Affordable ball screws Stan Stocker 2002-06-21 11:07:44 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Bill Vance 2002-06-21 12:23:22 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Jon Elson 2002-06-21 17:42:38 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Jon Elson 2002-06-21 17:52:37 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Nic van der Walt 2002-06-21 18:24:15 UTC RE: [CAD_CAM_EDM_DRO] Affordable ball screws JanRwl@A... 2002-06-21 20:01:32 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws John 2002-06-22 02:19:42 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Nic van der Walt 2002-06-22 02:46:00 UTC RE: [CAD_CAM_EDM_DRO] Affordable ball screws bjammin@i... 2002-06-22 06:20:58 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws John 2002-06-22 06:46:09 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Bill Vance 2002-06-22 08:45:44 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Jon Elson 2002-06-22 09:39:53 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Jon Elson 2002-06-22 09:44:02 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Jon Elson 2002-06-22 09:53:12 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws John 2002-06-22 14:06:20 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws Jon Elson 2002-06-22 15:08:01 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws jim davies 2002-06-22 18:54:59 UTC Re: [CAD_CAM_EDM_DRO] Affordable ball screws