CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] (unknown)

Posted by Dan Mauch
on 2002-06-26 10:01:26 UTC
I put some servo motors on my sherline as a demo project and had it
running at 72 IPM. Before use, I oil the leadscrews and all the wearing
points and re oil everything periodically. I don't recommend running it
that fast for long periods.
Dan

-----Original Message-----
From: luisguillermo98 [mailto:luisguillermo98@...]
Sent: Wednesday, June 26, 2002 9:12 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] (unknown)

Hi Guys;
I would like to know if someone has run sherline's axis 30ipm or
more?. I have geckos and they are running the steppers really fast
without losee step. So if I run the axis 30ipm or more do you think
the lead screw or nuts will be damaged ? what is the highest speed
you guys have run your shelines axis?

Discussion Thread

Jon Elson 2000-11-16 15:05:39 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Carey L. Culpepper 2000-12-14 07:21:55 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Jon Elson 2000-12-19 13:19:13 UTC Re: [CAD_CAM_EDM_DRO] (unknown) wanliker@a... 2001-01-11 16:08:28 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Smoke 2001-11-24 09:45:06 UTC Re: [CAD_CAM_EDM_DRO] (unknown) catboat15@a... 2002-02-17 20:29:08 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Jon Elson 2002-02-17 22:30:18 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Jon Elson 2002-02-17 22:40:42 UTC Re: [CAD_CAM_EDM_DRO] (unknown) catboat15@a... 2002-02-18 07:43:28 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Dan Mauch 2002-06-26 10:01:26 UTC RE: [CAD_CAM_EDM_DRO] (unknown) luisguillermo98 2002-06-26 12:21:39 UTC Re: (unknown) bilg63475 2002-06-26 13:56:55 UTC Re: (unknown) luisguillermo98 2002-06-26 15:31:59 UTC Re: (unknown) Shelbyville Design & Signworks 2002-07-11 14:31:41 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Doug Harrison 2002-07-11 15:47:15 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Jon Elson 2002-10-08 11:08:19 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Art 2002-11-03 16:14:49 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Jon Elson 2002-12-10 22:53:08 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Raymond Heckert 2002-12-11 15:42:04 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Robert Campbell 2003-05-28 07:29:36 UTC Re: [CAD_CAM_EDM_DRO] (unknown) R Petersen 2003-05-28 20:34:07 UTC Re: [CAD_CAM_EDM_DRO] (unknown)CNC rebuild help Brian 2003-08-16 05:44:55 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Jon Elson 2003-10-21 10:35:06 UTC Re: [CAD_CAM_EDM_DRO] (unknown) JanRwl@A... 2004-03-03 12:35:40 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Monte 2004-03-04 06:35:28 UTC Re: (unknown) keith 2004-03-04 07:29:46 UTC RE: jerry's power supply .pdf