Re: (unknown)

--- In CAD_CAM_EDM_DRO@y..., "bilg63475" <bill@g...> wrote:
> I have built and sold over 40 CNC sherline machiens and they all
run
> in excess of 40 ipm. I have a few machines that have gone to
> production / high use customers, one of which was capable of
running
> in excess of 100 ipm. The leadscrew nuts were routinely adjusted /
> replaced as necessary. This machine was eventually refurbed by
simply
> replacing the leadscrews, nuts, and gibs. While there was some wear
> that could be seen in the black anodize, the machine is still
running
> as good today as it was 5 or 6 years ago.
>
> Bill Griffin
>
>
>
> --- In CAD_CAM_EDM_DRO@y..., "luisguillermo98"
<luisguillermo98@y...>
> wrote:
> > Ok;
> > Do you think 40 IPM would be ok?
> >
> >
> > --- In CAD_CAM_EDM_DRO@y..., "Dan Mauch" <dmauch@s...> wrote:
> > > I put some servo motors on my sherline as a demo project and
had
> it
> > > running at 72 IPM. Before use, I oil the leadscrews and all
the
> > wearing
> > > points and re oil everything periodically. I don't recommend
> > running it
> > > that fast for long periods.
> > > Dan
> > >
> > > -----Original Message-----
> > > From: luisguillermo98 [mailto:luisguillermo98@y...]
> > > Sent: Wednesday, June 26, 2002 9:12 AM
> > > To: CAD_CAM_EDM_DRO@y...
> > > Subject: [CAD_CAM_EDM_DRO] (unknown)
> > >
> > > Hi Guys;
> > > I would like to know if someone has run sherline's axis 30ipm
or
> > > more?. I have geckos and they are running the steppers really
> fast
> > > without losee step. So if I run the axis 30ipm or more do you
> think
> > > the lead screw or nuts will be damaged ? what is the highest
> speed
> > > you guys have run your shelines axis?