CAD CAM EDM DRO - Yahoo Group Archive

Re: (unknown)

Posted by bilg63475
on 2002-06-26 13:56:55 UTC
I have built and sold over 40 CNC sherline machiens and they all run
in excess of 40 ipm. I have a few machines that have gone to
production / high use customers, one of which was capable of running
in excess of 100 ipm. The leadscrew nuts were routinely adjusted /
replaced as necessary. This machine was eventually refurbed by simply
replacing the leadscrews, nuts, and gibs. While there was some wear
that could be seen in the black anodize, the machine is still running
as good today as it was 5 or 6 years ago.

Bill Griffin



--- In CAD_CAM_EDM_DRO@y..., "luisguillermo98" <luisguillermo98@y...>
wrote:
> Ok;
> Do you think 40 IPM would be ok?
>
>
> --- In CAD_CAM_EDM_DRO@y..., "Dan Mauch" <dmauch@s...> wrote:
> > I put some servo motors on my sherline as a demo project and had
it
> > running at 72 IPM. Before use, I oil the leadscrews and all the
> wearing
> > points and re oil everything periodically. I don't recommend
> running it
> > that fast for long periods.
> > Dan
> >
> > -----Original Message-----
> > From: luisguillermo98 [mailto:luisguillermo98@y...]
> > Sent: Wednesday, June 26, 2002 9:12 AM
> > To: CAD_CAM_EDM_DRO@y...
> > Subject: [CAD_CAM_EDM_DRO] (unknown)
> >
> > Hi Guys;
> > I would like to know if someone has run sherline's axis 30ipm or
> > more?. I have geckos and they are running the steppers really
fast
> > without losee step. So if I run the axis 30ipm or more do you
think
> > the lead screw or nuts will be damaged ? what is the highest
speed
> > you guys have run your shelines axis?

Discussion Thread

Jon Elson 2000-11-16 15:05:39 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Carey L. Culpepper 2000-12-14 07:21:55 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Jon Elson 2000-12-19 13:19:13 UTC Re: [CAD_CAM_EDM_DRO] (unknown) wanliker@a... 2001-01-11 16:08:28 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Smoke 2001-11-24 09:45:06 UTC Re: [CAD_CAM_EDM_DRO] (unknown) catboat15@a... 2002-02-17 20:29:08 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Jon Elson 2002-02-17 22:30:18 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Jon Elson 2002-02-17 22:40:42 UTC Re: [CAD_CAM_EDM_DRO] (unknown) catboat15@a... 2002-02-18 07:43:28 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Dan Mauch 2002-06-26 10:01:26 UTC RE: [CAD_CAM_EDM_DRO] (unknown) luisguillermo98 2002-06-26 12:21:39 UTC Re: (unknown) bilg63475 2002-06-26 13:56:55 UTC Re: (unknown) luisguillermo98 2002-06-26 15:31:59 UTC Re: (unknown) Shelbyville Design & Signworks 2002-07-11 14:31:41 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Doug Harrison 2002-07-11 15:47:15 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Jon Elson 2002-10-08 11:08:19 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Art 2002-11-03 16:14:49 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Jon Elson 2002-12-10 22:53:08 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Raymond Heckert 2002-12-11 15:42:04 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Robert Campbell 2003-05-28 07:29:36 UTC Re: [CAD_CAM_EDM_DRO] (unknown) R Petersen 2003-05-28 20:34:07 UTC Re: [CAD_CAM_EDM_DRO] (unknown)CNC rebuild help Brian 2003-08-16 05:44:55 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Jon Elson 2003-10-21 10:35:06 UTC Re: [CAD_CAM_EDM_DRO] (unknown) JanRwl@A... 2004-03-03 12:35:40 UTC Re: [CAD_CAM_EDM_DRO] (unknown) Monte 2004-03-04 06:35:28 UTC Re: (unknown) keith 2004-03-04 07:29:46 UTC RE: jerry's power supply .pdf