Re: [CAD_CAM_EDM_DRO] BDI hardware requirements
Posted by
Jon Elson
on 2002-07-10 10:18:16 UTC
jmkasunich wrote:
drive. You will have slow or ragged stepper operation with such a slow machine,
but it will definitely work.
Jon
> What about the "regular"I run a servo system with a 100 MHz Pentium, 32 MB ram, 1 GB hard
> EMC? I just acquired a Pentium 100MHz machine, 72M ram, 1.6G HD.
> I also picked up a RedHat 6 CD (came with a book). I now have
> a dual boot system, 700M Linux partition and 120M swap, with WIN95
> in the other partition. (Yeah! Just getting it running gets me
> psyched - I've been wanting to get into Linux for a couple of
> years, and finally made some time to do it.) This is certainly
> enough computer to let me start getting familiar with Linux.
> Is it enough to run EMC? Can I install EMC onto my existing
> Red Hat 6 system using the BDI disk, or do I need to re-install?
drive. You will have slow or ragged stepper operation with such a slow machine,
but it will definitely work.
Jon
Discussion Thread
Ray Henry
2002-07-03 08:04:12 UTC
What's a BDI -- was Re: Gekkos
jmkasunich
2002-07-03 09:36:39 UTC
BDI hardware requirements?-- was What's a BDI -- was Re: Gekkos
Ray Henry
2002-07-03 18:06:17 UTC
Re: BDI hardware requirements?-- was What's a BDI -- was Re: Gekkos
jmkasunich
2002-07-10 09:26:55 UTC
BDI hardware requirements
Jon Elson
2002-07-10 10:18:16 UTC
Re: [CAD_CAM_EDM_DRO] BDI hardware requirements
dakota8833
2002-07-10 13:32:00 UTC
Re: BDI hardware requirements
dakota8833
2002-07-10 13:51:55 UTC
Re: BDI hardware requirements
Ray Henry
2002-07-10 16:08:27 UTC
Re: Re: BDI hardware requirements
bjammin@i...
2002-07-11 05:10:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: BDI hardware requirements
Ray Henry
2002-07-11 06:58:08 UTC
Re: Re: BDI hardware requirements
Ray Henry
2002-07-11 07:07:22 UTC
Re: Re: BDI hardware requirements
jmkasunich
2002-07-11 07:22:01 UTC
Re: BDI hardware requirements
Ian W. Wright
2002-07-11 10:13:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: BDI hardware requirements
Jon Elson
2002-07-11 10:51:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: BDI hardware requirements
Joll503@A...
2002-07-11 23:17:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: BDI hardware requirements
Bill Vance
2002-07-12 00:44:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: BDI hardware requirements
Ray Henry
2002-07-12 15:14:26 UTC
Re: Re: Re: Re: BDI hardware requirements
bjammin@i...
2002-07-13 05:36:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: BDI hardware requirements