CAD CAM EDM DRO - Yahoo Group Archive

Re: Re: Re: Re: BDI hardware requirements

Posted by Ray Henry
on 2002-07-12 15:14:26 UTC
What I do when I need a MS-Windows or a dos partition is plan for it before I
begin to install any software. Install the MS first but make it install in a
small partition so that the rest of the drive is open for Linux. When you
get that running to your satisfaction make a boot disk for it.

Now install the Linux using a manual partition of the hard drive and work
around the dos partition. When the Linux install asks where to mount the dos
partition, I tell it /mnt/windows or /mnt/dos. When the Linux install is
complete I ask for a boot disk for it also.

Then I start up linux and may need to edit LILO or GRUB in order to enable
the multiple boot menu.

HTH

Ray

>    From: Joll503@...

> In a message dated 7/11/02 7:11:54 AM Central Daylight Time,
> bjammin@... writes:
>
> << Would someone cover for me the brief procedure for installing a DOS
> Thank you, the first answer answerd question in days . I usually dont have
> a partition in  a Linux box?
>  
>  
>  At 06:08 PM 7/10/02 -0500, you wrote:
>  >
>  >John
>  >
>  >Sounds like you've made a good start with the dual boot.  The 700 meg is
>  >small but if you remove the Red H >>

Discussion Thread

Ray Henry 2002-07-03 08:04:12 UTC What's a BDI -- was Re: Gekkos jmkasunich 2002-07-03 09:36:39 UTC BDI hardware requirements?-- was What's a BDI -- was Re: Gekkos Ray Henry 2002-07-03 18:06:17 UTC Re: BDI hardware requirements?-- was What's a BDI -- was Re: Gekkos jmkasunich 2002-07-10 09:26:55 UTC BDI hardware requirements Jon Elson 2002-07-10 10:18:16 UTC Re: [CAD_CAM_EDM_DRO] BDI hardware requirements dakota8833 2002-07-10 13:32:00 UTC Re: BDI hardware requirements dakota8833 2002-07-10 13:51:55 UTC Re: BDI hardware requirements Ray Henry 2002-07-10 16:08:27 UTC Re: Re: BDI hardware requirements bjammin@i... 2002-07-11 05:10:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: BDI hardware requirements Ray Henry 2002-07-11 06:58:08 UTC Re: Re: BDI hardware requirements Ray Henry 2002-07-11 07:07:22 UTC Re: Re: BDI hardware requirements jmkasunich 2002-07-11 07:22:01 UTC Re: BDI hardware requirements Ian W. Wright 2002-07-11 10:13:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: BDI hardware requirements Jon Elson 2002-07-11 10:51:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: BDI hardware requirements Joll503@A... 2002-07-11 23:17:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: BDI hardware requirements Bill Vance 2002-07-12 00:44:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: BDI hardware requirements Ray Henry 2002-07-12 15:14:26 UTC Re: Re: Re: Re: BDI hardware requirements bjammin@i... 2002-07-13 05:36:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: BDI hardware requirements