Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: BDI hardware requirements

Guys, I've found LILO and I've even found the GUI window that runs LILO. It
asks me things like what opsys to use. That's no frigging help! I need to
know exactly how and where to load that opsys (say MSDOS 6.2), and exactly
what to tell LILO to make it work.



At 05:14 PM 7/12/02 -0500, you wrote:

>
>What I do when I need a MS-Windows or a dos partition is plan for it

before I

>begin to install any software. Install the MS first but make it install

in a

>small partition so that the rest of the drive is open for Linux. When you
>get that running to your satisfaction make a boot disk for it.
>
>Now install the Linux using a manual partition of the hard drive and work
>around the dos partition. When the Linux install asks where to mount the

dos

>partition, I tell it /mnt/windows or /mnt/dos. When the Linux install is
>complete I ask for a boot disk for it also.
>
>Then I start up linux and may need to edit LILO or GRUB in order to enable
>the multiple boot menu.
>
>HTH
>
>Ray
>
>>    From: Joll503@...
>
>> In a message dated 7/11/02 7:11:54 AM Central Daylight Time,
>> bjammin@... writes:
>>
>> << Would someone cover for me the brief procedure for installing a DOS
>> Thank you, the first answer answerd question in days . I usually dont have
>> a partition in  a Linux box?
>>  
>>  
>>  At 06:08 PM 7/10/02 -0500, you wrote:
>>  >
>>  >John
>>  >
>>  >Sounds like you've made a good start with the dual boot.  The 700 meg is
>>  >small but if you remove the Red H >>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.

>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this as a

sister site to the CCED group, as many of the same members are there, for
OT subjects, that are not allowed on the CCED list.

>
>
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>

Regards, Hoyt


Anti-virus request: Please do not add this email addy to address books
Belfab CNC - http://www.freeyellow.com/members/belfab/belfab.html
US Best MC - http://www.freeyellow.com/members/batwings/best.html
Camping/Caving - http://www.freeyellow.com/members/batwings/caving.html
Hac ahac que haec, hoc, hoc, patui