RE: [CAD_CAM_EDM_DRO] Re: Question:Parallel interface with Gecko 201 drivers

Slight correction. For a G201 that would be one signal and one +5v wire
in each pair. Personally I will just stick with however the cable make
assembled my parallel cable.

Tim
[Denver, CO]

> -----Original Message-----
> Dear Kayla,
> For single ended signals such as you are talking about
> the twisted pair is one signal line (step or direction) and
> one ground line, therefore it doesn't matter how many signals
> there are, they always come out even. Do NOT twist two
> signals together. P.S. last post is right, it makes very
> little difference in the cable if the interface is done right
> and the cable is less than 10 meters. I hope this helps, Mike C.