CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Transfering to a Dyna Myte (more answer...)

Posted by a M
on 2003-04-02 22:04:59 UTC
James,

Thanks for the heads up, I currently am running windows xp and will try to hyperterminal the mill tomorrow night.

thanks for the help

Anders

James Wilsom <jwilson002@...> wrote:I don't know what Cimco is, however the comments in a later repsonse are on
the nose with one exception, NFS is not supported by windows (prior to XP
which I don't know) much less being proprietary. TCP/IP which includes DNS
and NFS is a whole suite of communication protocols. What you want is to
talk to your com port and hope the machine you are talking to uses ASCII
like the other guy said. What operating system are you using on your PC? I
you have access to a basic interpreter you can talk directly to com1 or com2
and get some immediate results. One of the first after setting baud, data,
stop and parity is to establish if your machine is half or full duplex.
Thses things can all be configured directly from the basic program.
Otherwise use a terminal program. The only problem here is the program will
require you to select a terminal to emulate which throughs in an additional
variable. If you go the terminal program route it must be a stand alone
program such as Crosstalk. Using a terminal emulator in windows XP is not
going to work. You will not be talking through the com port. You will have
to execute Crosstalk or whatever from the command prompt.

Jim


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




---------------------------------
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more

[Non-text portions of this message have been removed]

Discussion Thread

andersmalpass 2003-04-01 16:12:14 UTC Transfering to a Dyna Myte through the RS232 using Cimco Edit caudlet 2003-04-01 16:55:53 UTC Re: Transfering to a Dyna Myte through the RS232 using Cimco Edit caudlet 2003-04-01 17:12:13 UTC Re: Transfering to a Dyna Myte (more answer...) James Wilsom 2003-04-01 18:32:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Transfering to a Dyna Myte (more answer...) a M 2003-04-02 22:04:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Transfering to a Dyna Myte (more answer...) James Wilsom 2003-04-03 07:35:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Transfering to a Dyna Myte (more answer...) Chris Brick 2003-04-03 08:08:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Transfering to a Dyna Myte (more answer...) James Wilsom 2003-04-03 15:51:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Transfering to a Dyna Myte (more answer...)