Re: [CAD_CAM_EDM_DRO] drill press ( was Beginners screws ( was ACME ( was Re: leadscrew,
Posted by
alex
on 2003-05-22 07:30:12 UTC
Dave,
thank you for another ingenious idea!
Best regards, Alex
thank you for another ingenious idea!
Best regards, Alex
----- Original Message -----
From: turbulatordude <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, May 21, 2003 7:56 PM
Subject: [CAD_CAM_EDM_DRO] drill press ( was Beginners screws ( was ACME
was Re: leadscrew,
> Hi Alex, one way to get holes aligned pretty well on a drillpress is
> to get a drill bushing for your hole size(s)
>
> mount an angle on the column with a muffler clamp (large U shape with
> bolts)
>
> then mount a 1/4 piece of aluminum plate or something on that angle
> so it reaches out under the drill.
>
> drill a hole in that plate then ream for the bushing.
>
> now you would have a method to guid the drill be to a distance
> exactly located from the drill press column and under the chuck.
>
> if you want to drill holes along a part, mount this contraption on
> the column, and mount a guide fence firmly onto the table so that the
> hole will be the distance from the guide fence you need.
>
> move your part, C-clamp it to the guide fence and table and drill.
> losten the clamps and move the part. All the holes will be the same
> distance from the fence. spacing between holes is more tricky, but
> you should get the idea.
>
> Dave
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
alex
2003-05-16 09:04:52 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
Ross
2003-05-16 19:47:49 UTC
Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-17 11:11:45 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-18 12:54:04 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
turbulatordude
2003-05-18 17:23:03 UTC
Beginners screws ( was ACME ( was Re: leadscrew,
Ross
2003-05-18 19:02:33 UTC
Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-19 12:59:38 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-19 16:56:03 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
CL
2003-05-19 19:42:11 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
turbulatordude
2003-05-20 04:13:15 UTC
side loads ( was Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-20 07:10:46 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-20 14:41:22 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
Harvey White
2003-05-21 07:03:36 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-21 07:38:00 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
turbulatordude
2003-05-21 07:41:34 UTC
Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-21 08:02:53 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
turbulatordude
2003-05-21 08:59:13 UTC
Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-21 09:15:03 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
Harvey White
2003-05-21 10:40:37 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-21 11:22:59 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-21 11:46:58 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
Ross
2003-05-21 12:56:36 UTC
Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-21 13:37:02 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
turbulatordude
2003-05-21 16:56:46 UTC
drill press ( was Beginners screws ( was ACME ( was Re: leadscrew,
Harvey White
2003-05-21 20:04:41 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
Harvey White
2003-05-21 20:06:40 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
Harvey White
2003-05-21 20:09:24 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-22 07:30:12 UTC
Re: [CAD_CAM_EDM_DRO] drill press ( was Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-22 10:58:38 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-22 13:38:55 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
JanRwl@A...
2003-05-22 14:21:02 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-22 14:32:13 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
Harvey White
2003-05-22 15:04:08 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
Harvey White
2003-05-22 15:06:17 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
turbulatordude
2003-05-22 17:44:29 UTC
Beginners screws ( was ACME ( was Re: leadscrew,
Harvey White
2003-05-22 20:09:01 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-23 09:47:10 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
Harvey White
2003-05-23 10:20:39 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,
alex
2003-05-23 10:33:10 UTC
Re: [CAD_CAM_EDM_DRO] Beginners screws ( was ACME ( was Re: leadscrew,