RE: [CAD_CAM_EDM_DRO] availability of composite multiconductor cable?

Try these too:

http://www.sabawp.com/HTMLobj-448/servousa4.pdf
http://www.sabawp.com/HTMLobj-446/servousa2.pdf
http://www.sabawp.com/HTMLobj-449/servousa5.pdf
http://www.lappcableasia.com/ under catalog - Olflex Servo Cables


Regards,

Carlos Guillermo
VERVE Engineering & Design

-----Original Message-----
From: Carlos Guillermo [mailto:carlos@...]
Sent: Saturday, July 19, 2003 3:00 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] availability of composite
multiconductor cable?

Try these guys. Probably pricey, but for only a few feet, the
total bill can't be too high. Let us know?

http://www.alphawire.com/pages/103.cfm?partner=0?=0

Regards,

Carlos Guillermo
VERVE Engineering & Design

-----Original Message-----
From: David A. Frantz [mailto:wizard@...]
Sent: Saturday, July 19, 2003 2:35 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] availability of composite
multiconductor cable?

While I realize these are available, are you sure you really want
to do
this??.

I've seeen motor leads interfer with encodered signals when they
are run
side by side in seperate shielded cables. This really seems to
be a
case of asking for trouble.

Dave


mrgamber wrote:

>Instead of running 2 cables to my servo's, I'd rather run 1

composite

>of 14 or 16 AWG pair with 4 or 5 22-24AWG. shielded of course.
>
>Where do I buy such a beast?

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to
be a sister site to the CCED group, as many of the same members
are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/