CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine

Posted by Zafar Salam
on 2003-08-06 00:33:40 UTC
Hi Sammy,

A few months ago I helped build a similar pcb drilling machine for the final
year students of a local engineering school. They used drawer channels for
the x, y and z ways. X and Y axes were driven by a couple of nema23 steppers
through timing belts and the z axis was driven by a screw through dc motor
and limit switches. Base of machine was of mild steel plates and y and z
axis channels rested on aluminium brackets. Allegro's 5804B chip was used to
drive the steppers. You can use turbocnc as the controller to feed step &
direction signals. I can send you sketches of the the structure if you wish.

Regards,
Zafar

----- Original Message -----
From: "Sammy" <sammytaggart@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, August 06, 2003 4:15 AM
Subject: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine


> Hello all,
>
> Firstly, my apologises for my "newbieness". Im very sorry if i annoy
> anyone cause what im doing sound a whole lot easier than what u folks
> are all talking about.
>
> so, Im a final year technology and design (With education..teacher
> to be) student in Belfast, northern ireland and as part of my final
> year assignment i have chosen to design and manufacture a CNC PCB
> Milling machine.
>
> As most schools in northern ireland, i am forced to use PCB Wizard as
> the mask creating software, but it produces an nc .drl file hich i
> can easily convert to g-code using a converter i found on the net. I
> have then chosen to use Master 5 to control the system via parallel
> port. this i think is the most of the software/gcode problems sort.
> the next and most ambitous problem is making the actual machine.
>
> Stepper motor control of and xy table with a gantry type z axis i
> feel would probably work best for me. My question is,
>
> what do i need to make such a board
>
> Is anyone aware of the stepper motor drivers required to operate a
> stepper frm the parallel port?
>
> What sort of stepper
>
> How do i make the xy table....
>
> im pretty new to all this so sorry again.
>
> Also i cant really buy "kits" or a complete xy table..i cant just
> assemble the thing..i must design and make the whole thing so thats
> going to be time consuming.
>
> I'd really appreciate help on this one. I'm only 22 with no
> qualifications/experience on this topic
>
> Any education from anyone about ANY of this stuff would be much
> appreciated
>
> THANK YOU
>
> Sammy Taggart
>
> Northern ireland
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

Sammy 2003-08-05 22:18:26 UTC Help?? CNC PCB Drilling Machine turbulatordude 2003-08-05 22:39:52 UTC Re: Help?? CNC PCB Drilling Machine Harvey White 2003-08-05 22:40:33 UTC Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine Zafar Salam 2003-08-06 00:33:40 UTC Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine Graham Stabler 2003-08-06 02:00:38 UTC Re: Help?? CNC PCB Drilling Machine Richard 2003-08-06 07:15:47 UTC Re: Help?? CNC PCB Drilling Machine turbulatordude 2003-08-06 07:16:23 UTC Re: Help?? CNC PCB Drilling Machine Antonius J.M. Groothuizen 2003-08-06 07:40:19 UTC Re: Help?? CNC PCB Drilling Machine Markus Zingg 2003-08-06 07:41:06 UTC Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine Jon Elson 2003-08-06 09:44:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine Richard 2003-08-06 10:48:54 UTC Re: Help?? CNC PCB Drilling Machine JanRwl@A... 2003-08-06 11:04:50 UTC Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine turbulatordude 2003-08-06 18:30:27 UTC Re: Help?? CNC PCB Drilling Machine - stepper drivers turbulatordude 2003-08-06 18:44:28 UTC Re: Help?? CNC PCB Drilling Machine grantfair2001 2003-08-06 19:26:03 UTC Re: Help?? CNC PCB Drilling Machine turbulatordude 2003-08-06 19:55:50 UTC Re: Help?? CNC PCB Drilling Machine grantfair2001 2003-08-06 20:32:15 UTC Re: Help?? CNC PCB Drilling Machine Jon Elson 2003-08-06 21:27:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine Alan Marconett KM6VV 2003-08-06 22:00:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine turbulatordude 2003-08-06 22:23:14 UTC Re: Help?? CNC PCB Drilling Machine Harvey White 2003-08-06 22:29:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine Richard 2003-08-07 04:21:01 UTC Re: Help?? CNC PCB Drilling Machine turbulatordude 2003-08-07 05:33:24 UTC Re: Help?? CNC PCB Drilling Machine - EDM a PCB mayfieldtm 2003-08-07 10:20:47 UTC Re: Help?? CNC PCB Drilling Machine - EDM a PCB Jon Elson 2003-08-07 10:21:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine Alan Marconett KM6VV 2003-08-07 10:43:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine