CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine

Posted by Harvey White
on 2003-08-06 22:29:22 UTC
On Thu, 07 Aug 2003 03:32:06 -0000, you wrote:

>There is a simple stepper circuit which has been around for years, a
>recent publication showing it is at:
>
>http://www.reed-electronics.com/ednmag/archives/1998/032698/07di.h

OK.... go find a floppy disk drive, 5 1/4 inch. You get a 10 in-oz
stepper motor and a controller... just replace the pullup pack with
higher value resistors (2k or 4.7K), and parallel the inputs with
another drive as needed...

You can pull out the track zero sensors and the write protect sensor
and make them limit switches...

Only problem is that 1) you may have to reverse one coil on the
stepper because it moves in the "wrong" direction, and

2) these are really wimpy steppers.

Harvey



>
>Page down to "Inexpensive logic controls stepper motor".
>
>It can be used with unipolar (K179) and bipolar (K159) drivers.
>Inexpensive CMOS and MOSFET versions, which can handle about 6 amps
>without heatsinks, are sold by:
>
>http://www.kitsrus.com/
>
>Schematics are available on that website too.
>
>Alltronics sells the unipolar K179 for $10. PCB and parts. Six amps
>(more with heatsinks) per axis - a three axis driver for #30.00.
>That's inexpensive.
>
>As far as copying things like magazine articles, is one copy not o.k.
>under the "fair use" practice for scholarly purposes like Sammy's?
>
>Grant
>
>-- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
><davemucha@j...> wrote:
>> I don't think there is a real problem. I know that Johns schematic
>> has been posted on this list in the past so it is not totally a trade
>> secret.
>>
>> also, Sammy mentioned that he needs to design and build, so
>> regardless what his eyes pass across, I assume he will modify it to
>> some degree.
>>
>> I had the urge to send Sammy some of the schematics I have gathered
>> over the years, but I am not sure what I have is all public
>> information on the net. That said, I was reminding myself not to bow
>> to temtation.
>>
>> An interesting note is that some of the old timers had to design
>> circuits from the ground up or pay multiple hundreds of dollars per
>> channel ! man, we have come a long way in this hobby.
>>
>> I have some $50 steppers that origionally sold for hundreds and
>> drivers that at one time would have been worth hundreds so I thing
>> $1,000 per motor at one time was cheap. now you can do an entire
>> machine for less.
>>
>> Dave
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Discussion Thread

Sammy 2003-08-05 22:18:26 UTC Help?? CNC PCB Drilling Machine turbulatordude 2003-08-05 22:39:52 UTC Re: Help?? CNC PCB Drilling Machine Harvey White 2003-08-05 22:40:33 UTC Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine Zafar Salam 2003-08-06 00:33:40 UTC Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine Graham Stabler 2003-08-06 02:00:38 UTC Re: Help?? CNC PCB Drilling Machine Richard 2003-08-06 07:15:47 UTC Re: Help?? CNC PCB Drilling Machine turbulatordude 2003-08-06 07:16:23 UTC Re: Help?? CNC PCB Drilling Machine Antonius J.M. Groothuizen 2003-08-06 07:40:19 UTC Re: Help?? CNC PCB Drilling Machine Markus Zingg 2003-08-06 07:41:06 UTC Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine Jon Elson 2003-08-06 09:44:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine Richard 2003-08-06 10:48:54 UTC Re: Help?? CNC PCB Drilling Machine JanRwl@A... 2003-08-06 11:04:50 UTC Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine turbulatordude 2003-08-06 18:30:27 UTC Re: Help?? CNC PCB Drilling Machine - stepper drivers turbulatordude 2003-08-06 18:44:28 UTC Re: Help?? CNC PCB Drilling Machine grantfair2001 2003-08-06 19:26:03 UTC Re: Help?? CNC PCB Drilling Machine turbulatordude 2003-08-06 19:55:50 UTC Re: Help?? CNC PCB Drilling Machine grantfair2001 2003-08-06 20:32:15 UTC Re: Help?? CNC PCB Drilling Machine Jon Elson 2003-08-06 21:27:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine Alan Marconett KM6VV 2003-08-06 22:00:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine turbulatordude 2003-08-06 22:23:14 UTC Re: Help?? CNC PCB Drilling Machine Harvey White 2003-08-06 22:29:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine Richard 2003-08-07 04:21:01 UTC Re: Help?? CNC PCB Drilling Machine turbulatordude 2003-08-07 05:33:24 UTC Re: Help?? CNC PCB Drilling Machine - EDM a PCB mayfieldtm 2003-08-07 10:20:47 UTC Re: Help?? CNC PCB Drilling Machine - EDM a PCB Jon Elson 2003-08-07 10:21:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine Alan Marconett KM6VV 2003-08-07 10:43:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine