CAD CAM EDM DRO - Yahoo Group Archive

Re: Help?? CNC PCB Drilling Machine

on 2003-08-06 22:23:14 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Alan Marconett KM6VV
<KM6VV@a...> wrote:
> Hi Jon, List,
>
> A neat idea, but I'm wondering about the "carbon tracks" which
usually
> accompany arcs on PCBs. This could render a board useless.
>
> Might be a little to keep the board "grounded" as traces are
isolated.
>
> Anyone ready to try it? I'd like to hear the results!
>
> Alan KM6VV


I would worry about the etching being complete near the electrical
path but not as complete on the side of the etch that is near the
isolated pads.

Makes me wonder if there is a conductive coating that would act as a
resist also.

that way, one could etch with EDM, then polish with ferric chloride
to scrub any thing sections.

seems like a great idea !

any idea what software can be used to program tool paths etching
isolated sections first ?

Dave

Discussion Thread

Sammy 2003-08-05 22:18:26 UTC Help?? CNC PCB Drilling Machine turbulatordude 2003-08-05 22:39:52 UTC Re: Help?? CNC PCB Drilling Machine Harvey White 2003-08-05 22:40:33 UTC Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine Zafar Salam 2003-08-06 00:33:40 UTC Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine Graham Stabler 2003-08-06 02:00:38 UTC Re: Help?? CNC PCB Drilling Machine Richard 2003-08-06 07:15:47 UTC Re: Help?? CNC PCB Drilling Machine turbulatordude 2003-08-06 07:16:23 UTC Re: Help?? CNC PCB Drilling Machine Antonius J.M. Groothuizen 2003-08-06 07:40:19 UTC Re: Help?? CNC PCB Drilling Machine Markus Zingg 2003-08-06 07:41:06 UTC Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine Jon Elson 2003-08-06 09:44:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine Richard 2003-08-06 10:48:54 UTC Re: Help?? CNC PCB Drilling Machine JanRwl@A... 2003-08-06 11:04:50 UTC Re: [CAD_CAM_EDM_DRO] Help?? CNC PCB Drilling Machine turbulatordude 2003-08-06 18:30:27 UTC Re: Help?? CNC PCB Drilling Machine - stepper drivers turbulatordude 2003-08-06 18:44:28 UTC Re: Help?? CNC PCB Drilling Machine grantfair2001 2003-08-06 19:26:03 UTC Re: Help?? CNC PCB Drilling Machine turbulatordude 2003-08-06 19:55:50 UTC Re: Help?? CNC PCB Drilling Machine grantfair2001 2003-08-06 20:32:15 UTC Re: Help?? CNC PCB Drilling Machine Jon Elson 2003-08-06 21:27:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine Alan Marconett KM6VV 2003-08-06 22:00:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine turbulatordude 2003-08-06 22:23:14 UTC Re: Help?? CNC PCB Drilling Machine Harvey White 2003-08-06 22:29:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine Richard 2003-08-07 04:21:01 UTC Re: Help?? CNC PCB Drilling Machine turbulatordude 2003-08-07 05:33:24 UTC Re: Help?? CNC PCB Drilling Machine - EDM a PCB mayfieldtm 2003-08-07 10:20:47 UTC Re: Help?? CNC PCB Drilling Machine - EDM a PCB Jon Elson 2003-08-07 10:21:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine Alan Marconett KM6VV 2003-08-07 10:43:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Help?? CNC PCB Drilling Machine