Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
Posted by
Les Newell
on 2003-09-26 15:39:26 UTC
My Emco turret leaves the dc motor with power continuously applied in
reverse to force the turret against the stop. The current it the motor is
limited so it does not overheat due to being stalled. It sounds horrible
leaving a motor stalled like that but in practise it works very well.
Les
reverse to force the turret against the stop. The current it the motor is
limited so it does not overheat due to being stalled. It sounds horrible
leaving a motor stalled like that but in practise it works very well.
Les
> The only advantage I can see in using a stepper over a DC motor would be
> using the holding torque against the stop. It would be possible to use a
Discussion Thread
digitaldesk2000
2003-09-25 14:45:37 UTC
turret tool post for lathe
Doug Fortune
2003-09-25 21:46:09 UTC
Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
Les Newell
2003-09-26 00:48:14 UTC
Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
wanliker@a...
2003-09-26 07:24:55 UTC
Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
Les Newell
2003-09-26 08:09:57 UTC
Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
wanliker@a...
2003-09-26 08:54:00 UTC
Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
Les Newell
2003-09-26 12:33:22 UTC
Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
Terry Owens
2003-09-26 15:30:32 UTC
Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
Les Newell
2003-09-26 15:39:26 UTC
Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
Alex
2003-09-27 07:23:57 UTC
Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
Les Newell
2003-09-27 10:48:17 UTC
Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
Alex
2003-09-27 20:26:22 UTC
Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
Les Newell
2003-09-27 23:39:41 UTC
Re: [CAD_CAM_EDM_DRO] turret tool post for lathe
doug98105
2003-09-28 09:06:18 UTC
Re: turret tool post for lathe
Les Newell
2003-09-29 01:13:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: turret tool post for lathe
Terry Owens
2003-09-30 08:42:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: turret tool post for lathe
Les Newell
2003-09-30 09:07:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: turret tool post for lathe
Dan Mauch
2003-09-30 10:22:45 UTC
RE: [CAD_CAM_EDM_DRO] Re: turret tool post for lathe
Les Newell
2003-09-30 13:06:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: turret tool post for lathe
Kim Lux
2003-09-30 13:39:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: turret tool post for lathe
Marcus and Eva
2003-09-30 19:23:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: turret tool post for lathe
Terry Owens
2003-10-01 03:26:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: turret tool post for lathe