CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ?

Posted by Kim Lux
on 2003-10-29 07:28:06 UTC
I keep hearing the same thing: some sort of settable limit should be
employed to keep the tooling from doing something stupid. The potential
for disaster bothers me most on our lathe. The more I think about it,
the more I'd like some sort of movable mechanical limit switch system.
The range of tools we use on the lathe is pretty big, so this might not
do much anyway.

Kim




On Tue, 2003-10-28 at 17:13, Raymond Heckert wrote:
> Most of the 'big dollar' programs employ 'no-go' zones. Places where the
> machine dare not go - under any circumstances (like chucks, etc.) These
> collision-avoidance zones are programmed at initial installation. That
> doesn't stop Stupid Operator Mistakes, though. I remember once, I 'backed
> up' part way through a program to re-do a feature that didn't clean up
> properly. Only after I hot the start button, and watched as the WRONG tool
> (1", multi-flute x 6" long endmill) promptly tried to go through a 2" thick
> section of aluminum. The endmill lost the battle, but the $800+ part was
> scrapped, I was reduced to a state of some humility... But I never did that
> again! When I went through Lincoln Electric's Robotic Welding Program, they
> employed a break-away head to prevent ultimate ruination.
>
> RayHex
>
> ----------
> > From: Kim Lux <lux@...>
> >
> > I'd like to know what is supposed to "give" when one crashes a CNC
> > tool/slide into a chuck, tailstock, etc ?
> >
> > Lets say we've got a servo/ballscrew set up that generates 1000 to 1500
> > pounds of force when called on. Next, we accidentally command that axis
> > to run into something immovable: a chuck, tailstock, etc. On a
> > commercial machine, how is this handled without wrecking anything ?
> >
> > Right now we've got a quick blow fuse that pops in our equipment. It is
> > the only way that I can see to limit the damage. What is everyone else
> > doing ?
> >
> > BTW: now that we are experienced, we rarely crash our equipment. I'm
> > just curious/wondering how others and commercial equipment handle this.
> >
> > --
> > Kim Lux <lux@...>
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Kim Lux <lux@...>

Discussion Thread

fuddham 2003-10-26 05:44:41 UTC VFD for a 15HP CNC lathe caudlet 2003-10-26 06:37:39 UTC Re: VFD for a 15HP CNC lathe Marv Frankel 2003-10-26 07:12:53 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe fuddham@a... 2003-10-26 07:35:52 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe caudlet 2003-10-26 07:48:15 UTC Re: VFD for a 15HP CNC lathe David A. Frantz 2003-10-26 08:36:58 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe vavaroutsos 2003-10-26 09:09:51 UTC Re: VFD for a 15HP CNC lathe Doug Fortune 2003-10-26 17:37:55 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe fuddham@a... 2003-10-26 17:52:59 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe Raymond Heckert 2003-10-26 19:23:27 UTC Re: [CAD_CAM_EDM_DRO] VFD for a 15HP CNC lathe Markwayne 2003-10-26 20:22:17 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe Marv Frankel 2003-10-26 21:00:09 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe Jon Elson 2003-10-26 21:35:01 UTC Re: [CAD_CAM_EDM_DRO] VFD for a 15HP CNC lathe Jon Elson 2003-10-26 21:41:22 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe fuddham@a... 2003-10-27 04:40:29 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe dan 2003-10-27 08:08:40 UTC Re: VFD for a 15HP CNC lathe Chuck Knight 2003-10-27 08:08:58 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe Kim Lux 2003-10-27 08:09:11 UTC PCB routing with CNC milling machine.... anti_entropics 2003-10-27 08:09:12 UTC Re: VFD for a 15HP CNC lathe Jerry Kimberlin 2003-10-27 08:09:41 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe Jon Elson 2003-10-27 09:47:16 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... Jon Elson 2003-10-27 09:50:18 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe Tim Goldstein 2003-10-27 09:58:57 UTC RE: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... Harvey White 2003-10-27 13:42:02 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... Harvey White 2003-10-27 13:44:49 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... James Cullins 2003-10-27 18:24:20 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... Tim Goldstein 2003-10-27 18:39:50 UTC RE: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... James Cullins 2003-10-27 18:48:18 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... vnegrete@r... 2003-10-27 19:09:39 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... David A. Frantz 2003-10-27 19:29:32 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe John Johnson 2003-10-27 23:06:20 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... Kim Lux 2003-10-27 23:15:20 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... Brian 2003-10-27 23:16:22 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... Jerry Kimberlin 2003-10-27 23:16:32 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... Jon Elson 2003-10-27 23:35:39 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... turbulatordude 2003-10-28 03:32:52 UTC Re: PCB routing with CNC milling machine.... turbulatordude 2003-10-28 03:43:54 UTC Re: PCB routing with CNC milling machine.... James Cullins 2003-10-28 03:53:16 UTC Re: [CAD_CAM_EDM_DRO] Re: PCB routing with CNC milling machine.... James Cullins 2003-10-28 03:55:52 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... turbulatordude 2003-10-28 04:27:43 UTC Re: PCB routing with CNC milling machine.... fuddham@a... 2003-10-28 05:10:45 UTC Re: [CAD_CAM_EDM_DRO] Re: VFD for a 15HP CNC lathe Fred Smith 2003-10-28 06:27:32 UTC Re: PCB routing with CNC milling machine.... James Cullins 2003-10-28 07:12:53 UTC Re: [CAD_CAM_EDM_DRO] Re: PCB routing with CNC milling machine.... Kim Lux 2003-10-28 07:22:00 UTC Crashing CNCs: what gives ? IMService 2003-10-28 08:04:54 UTC Re: Crashing CNCs: what gives ? Vince Negrete 2003-10-28 08:24:46 UTC Re: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ? Harvey White 2003-10-28 08:59:02 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... Harvey White 2003-10-28 09:00:10 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... Jon Elson 2003-10-28 09:05:26 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... Jon Elson 2003-10-28 09:06:41 UTC Re: [CAD_CAM_EDM_DRO] Re: PCB routing with CNC milling machine.... stevenson_engineers 2003-10-28 09:08:59 UTC Re: Crashing CNCs: what gives ? Jon Elson 2003-10-28 09:17:23 UTC Re: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ? Jon Elson 2003-10-28 09:45:43 UTC Re: [CAD_CAM_EDM_DRO] Re: PCB routing with CNC milling machine.... Fred Smith 2003-10-28 12:03:46 UTC Re: PCB routing with CNC milling machine.... wanliker@a... 2003-10-28 12:14:00 UTC Re: [CAD_CAM_EDM_DRO] Re: PCB routing with CNC milling machine.... stevenson_engineers 2003-10-28 13:20:12 UTC Re: PCB routing with CNC milling machine.... Alan Rothenbush 2003-10-28 15:03:00 UTC Re: [CAD_CAM_EDM_DRO] PCB routing with CNC milling machine.... David A. Frantz 2003-10-28 19:41:29 UTC Re: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ? Raymond Heckert 2003-10-28 19:57:53 UTC Re: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ? Kim Lux 2003-10-28 21:16:36 UTC Re: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ? David Bloomfield 2003-10-28 21:17:19 UTC Re: Crashing CNCs: what gives ? ballendo 2003-10-29 06:52:26 UTC Re: PCB routing with CNC milling machine.... ballendo 2003-10-29 07:15:47 UTC Re: Crashing CNCs: what gives ? Kim Lux 2003-10-29 07:28:06 UTC Re: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ? Dan Mauch 2003-10-29 08:09:33 UTC RE: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ? David A. Frantz 2003-10-29 08:32:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Crashing CNCs: what gives ? ballendo 2003-10-29 09:29:33 UTC Lathes for retrofit was Re: Crashing CNCs: what gives ? Jon Elson 2003-10-29 10:44:14 UTC Re: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ? David A. Frantz 2003-10-29 21:11:19 UTC Re: [CAD_CAM_EDM_DRO] Lathes for retrofit was Re: Crashing CNCs: what gives ? Kim Lux 2003-10-29 23:22:01 UTC Re: [CAD_CAM_EDM_DRO] Lathes for retrofit was Re: Crashing CNCs: what gives ? Kim Lux 2003-10-29 23:22:02 UTC Re: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ? Tony Jeffree 2003-10-30 00:29:06 UTC Re: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ? ballendo 2003-10-30 05:26:20 UTC Lathes for retrofit Erie Patsellis 2003-10-30 07:25:02 UTC Re: [CAD_CAM_EDM_DRO] Lathes for retrofit was Re: Crashing CNCs: what gives ? wanliker@a... 2003-10-30 09:50:54 UTC Re: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ? David A. Frantz 2003-10-30 12:37:44 UTC Re: [CAD_CAM_EDM_DRO] Lathes for retrofit Kim Lux 2003-10-31 08:20:04 UTC CNC threading: tapping head or T/C holder ? Robb Greathouse 2003-10-31 08:20:17 UTC Re: [CAD_CAM_EDM_DRO] Lathes for retrofit was Re: Crashing CNCs: what gives ? Torsten 2003-10-31 10:32:10 UTC Re: Lathes for retrofit Tony Jeffree 2003-11-01 04:00:56 UTC Re: [CAD_CAM_EDM_DRO] Crashing CNCs: what gives ?