CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Tapered Threads? Kim's TurboCNC codes

Posted by Kim Lux
on 2003-11-03 11:51:14 UTC
You are right about it getting more complicated. For multiple pulses
per rev, you need the encoder output as well as an encoder index ouput,
so you know when you are at pulse #1 for the revolution. Thus far 1
pulse per rev does everything we need, so we'll keep using it as such.

Using the index pulse isn't a big deal, but you need an encoder with an
index output and you need to wire another channel into the controler and
PC. OR you could have an index tooth on the encoder gear that is much
bigger or smaller than the regular teeth and find pulse 1 with that.

Again, not too much difficult, but why bother ? If/when I need it, I'll
add it.

Kim


On Mon, 2003-11-03 at 11:40, Tony Jeffree wrote:
> At 11:19 03/11/2003 -0700, you wrote:
> >Furthermore, if TCNC needs multiple pulses per rev, I'll add it... The
> >syncing part of the TCNC code is pretty simple.
>
> ...but if you go for multiple pulses per rev, it will suddenly get
> significantly more complex. In order to be able to do multiple passes and
> maintain alignment between them, you will need a 1 PPR index pulse as well
> as your multiple PPR signal, if I am not mistaken.
>
>
> Regards,
> Tony
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Kim Lux <lux@...>

Discussion Thread

Jon Elson 2003-10-28 23:01:10 UTC Update on closed-loop to the computer with Gecko 320 Mariss Freimanis 2003-10-29 06:01:37 UTC Re: Update on closed-loop to the computer with Gecko 320 Linc Reed-Nickerson 2003-10-29 07:29:08 UTC Tapered Threads? Jon Elson 2003-10-29 10:25:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Update on closed-loop to the computer with Gecko 320 Alan Rothenbush 2003-10-29 10:39:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Update on closed-loop to the computer with Gecko 320 Mariss Freimanis 2003-10-29 11:20:50 UTC Re: Update on closed-loop to the computer with Gecko 320 Maddock Machine 2003-10-29 11:44:04 UTC Re: [CAD_CAM_EDM_DRO] Tapered Threads? doug98105 2003-10-29 17:13:14 UTC Re: Tapered Threads? vavaroutsos 2003-10-29 20:02:10 UTC Re: Update on closed-loop to the computer with Gecko 320 Jon Elson 2003-10-29 23:10:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Update on closed-loop to the computer with Gecko 320 Kim Lux 2003-10-29 23:21:58 UTC Re: [CAD_CAM_EDM_DRO] Tapered Threads? rotarysmp 2003-10-30 03:53:55 UTC Re: Tapered Threads? Kim's TurboCNC codes Miroslav Pejic 2003-10-30 05:01:23 UTC RE: [CAD_CAM_EDM_DRO] Re: Tapered Threads? Kim's TurboCNC codes Raymond Heckert 2003-10-30 21:12:46 UTC Re: [CAD_CAM_EDM_DRO] Tapered Threads? rotarysmp 2003-10-31 02:24:58 UTC Re: Tapered Threads? TurboCNC encoder setups. Kim Lux 2003-10-31 07:46:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Tapered Threads? Kim's TurboCNC codes rotarysmp 2003-11-01 13:13:04 UTC Re: Tapered Threads? Kim's TurboCNC codes Paul 2003-11-01 16:10:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Tapered Threads? Kim's TurboCNC codes Jon Elson 2003-11-01 22:48:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Tapered Threads? Kim's TurboCNC codes rotarysmp 2003-11-03 01:56:52 UTC Re: Tapered Threads? Kim's TurboCNC codes jmkasunich 2003-11-03 06:30:18 UTC Re: Tapered Threads? Kim's TurboCNC codes Kim Lux 2003-11-03 07:48:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Tapered Threads? Kim's TurboCNC codes Kim Lux 2003-11-03 07:48:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Tapered Threads? Kim's TurboCNC codes Jon Elson 2003-11-03 10:00:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Tapered Threads? Kim's TurboCNC codes Kim Lux 2003-11-03 10:19:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Tapered Threads? Kim's TurboCNC codes Tony Jeffree 2003-11-03 10:40:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Tapered Threads? Kim's TurboCNC codes Kim Lux 2003-11-03 11:51:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Tapered Threads? Kim's TurboCNC codes