Re: Tapered Threads? TurboCNC encoder setups.

Hi Peja,

Thanks for the link, I joined the YUCNC group and read the files you
pointed out. TurboCNC is currently coded to only sync once per rev on
the Hi->Lo (or is it the LO->HI) transition of one pin of the LPT.
Adding a multi pulse encoder is not going to help, as then I would
have to modify the software and the hardware. I would like to see if
I can double the accuracy (syncing twice per rev) with the existing
hardware since I have a 180° encoder wheel fitted.

Not like I have any real NEED to do this, but I thought it would be a
good first project in the TCNC Source.

Regards,
Mark