Re: [CAD_CAM_EDM_DRO] Re: Tapered Threads? Kim's TurboCNC codes

On Sat, 2003-11-01 at 23:47, Jon Elson wrote:

> The real problem is integrating this into a VERY complex structure like EMC,
> and handling all the incredibly complex interactions with tool length and
> radius compensation, offsets,

These issues are all taken care of before a synchronized move is
called. They really have no bearing on writing a synchronized move and
will be handled in a very similar manner to their non synchronized move
counterpart call.

> acceptable machine accelerations,

This has to be handled within the synchronized move.

> and all the
> other details of the possible G-code modes that could affect the operation.
> G-code is quite powerful, but the interactions, dependencies and side
> effects
> all need to be fully thought through before coding.
>
> Jon
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

--
Kim Lux <lux@...>