CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Digitizing

Posted by alex
on 2004-01-06 17:11:07 UTC
Understood!
In C minimal delay is 1 ms, but there are many ways to do smaller timing
in DOS ( don't ask me how).
Since this is OT will stop posting.
Alex

Graham Stabler wrote:

>>Alan,
>>does it mean that you manually move axis around an object and
>>
>>
>record
>
>
>>number of pulses generated by the steppers?
>>Alex
>>
>>
>
>The digitizer probe is just a fancy switch held in the spindle of
>the mill. The digitizing just involves the automatic pecking of the
>object with the probe in a grid. When contact is made the height
>and corresponding x,y co-ordinates are recorded.
>
>I need a timer because to drive the stepper motors you need to send
>a train of pulses, using just delay() means I am limited to 0.5khz
>stepping frequency (1ms on 1ms off) which leads to slow rapids
>between "pecks".
>
>Going off topic probably now
>
>Graham
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Yahoo! Groups Links
>
>To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
>To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
>Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>
>
>


[Non-text portions of this message have been removed]

Discussion Thread

Jon Anderson 2001-01-07 16:09:10 UTC Re: [CAD_CAM_EDM_DRO] Digitizing ballendo@y... 2001-01-07 16:14:36 UTC re:Digitizing Fred Smith 2001-01-07 18:14:46 UTC Re:Digitizing Jon Elson 2001-01-07 20:21:46 UTC Re: [CAD_CAM_EDM_DRO] Digitizing Smoke 2001-01-07 22:35:29 UTC Re: [CAD_CAM_EDM_DRO] Re:Digitizing Smoke 2001-01-07 22:49:47 UTC Re: [CAD_CAM_EDM_DRO] re:Digitizing Jon Anderson 2001-01-08 07:47:47 UTC Re: [CAD_CAM_EDM_DRO] Digitizing Marcus & Eva 2001-01-08 08:28:51 UTC Re: [CAD_CAM_EDM_DRO] re:Digitizing Bill Phillips 2001-01-08 13:55:04 UTC Re: [CAD_CAM_EDM_DRO] Digitizing Greg Nuspel 2001-01-08 14:02:31 UTC Re: [CAD_CAM_EDM_DRO] Digitizing diazden 2001-01-08 15:15:53 UTC Re: [CAD_CAM_EDM_DRO] Digitizing ballendo@y... 2001-01-08 17:05:13 UTC Re: re:Digitizing dave engvall 2001-01-08 17:20:30 UTC Re: [CAD_CAM_EDM_DRO] Re: re:Digitizing Jon Elson 2001-01-08 23:45:05 UTC Re: [CAD_CAM_EDM_DRO] Re: re:Digitizing nelap2002 2004-01-04 21:29:52 UTC Digitizing Graham Stabler 2004-01-05 04:37:03 UTC Re: Digitizing ccq@x... 2004-01-05 08:07:52 UTC Re: [CAD_CAM_EDM_DRO] Digitizing cnczeus 2004-01-05 09:20:29 UTC Re: Digitizing Alan Marconett KM6VV 2004-01-05 12:23:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing Graham Stabler 2004-01-06 04:45:09 UTC Re: Digitizing Alan Marconett KM6VV 2004-01-06 12:20:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing alex 2004-01-06 12:32:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing Alan Marconett KM6VV 2004-01-06 12:51:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing alex 2004-01-06 13:52:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing Alan Marconett KM6VV 2004-01-06 15:29:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing alex 2004-01-06 15:37:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing Graham Stabler 2004-01-06 17:05:46 UTC Re: Digitizing alex 2004-01-06 17:11:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing Alan Marconett KM6VV 2004-01-06 17:15:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing alex 2004-01-06 17:20:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing