Re: [CAD_CAM_EDM_DRO] Re: Ballscrew question

I don't believe it. I think you are a stalker. But really, people with similar interests are bound to show up on the same forums.

As to doing it once, cut something cheap the first time, like MDF or wax. When it cuts perfectly, then use the real stuff.

My Sherline conversion uses the original lead screws and backlash is very minimal. You can compensate in most software to help hide it.

Ron Thompson
Was On the Beautiful Mississippi Gulf Coast,
Now On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA

http://www.plansandprojects.com

The ultimate result of shielding men from the effects of folly is
to fill the world with fools.
--Herbert Spencer, English Philosopher (1820-1903)

----- Original Message -----
From: yodawill2000
To: CAD_CAM_EDM_DRO@yahoogroups.com
Sent: Wednesday, February 25, 2004 1:20 PM
Subject: [CAD_CAM_EDM_DRO] Re: Ballscrew question


Hiya Ron !!!
Im not following you around the forums ... Honest !!! Nuk Nuk
I would think a few Thou wouldnt be an issue ..
I'll be cutting 3/32 wide channels 1/16th deep mostly ..
I just want repeatabilty..
And the channels will be in a "X" pattern so X and Y will be working
together constantly
I would think a little backlash in both axis would equal twice the
error ..

Unless I set the RT at 45 ...
Man .. Im stinkin' this room up with BrainFarts ... hehe
Thanx a Mill guys ... (No Pun intended)
I just dont have enuff cashola to do this twice ..
Must be right the first time :O)






Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links







[Non-text portions of this message have been removed]