Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
Posted by
Peter Renolds
on 2004-09-24 05:24:01 UTC
Hi David,
I'm using ballscrews on all 3 axes. I first considered using an
electrically operated (to release) brake on the servo motor shaft but
others suggested that the gas springs might be suitable - so I tried
that first with good results.
Cheers, Peter
volitan712003 wrote:
I'm using ballscrews on all 3 axes. I first considered using an
electrically operated (to release) brake on the servo motor shaft but
others suggested that the gas springs might be suitable - so I tried
that first with good results.
Cheers, Peter
volitan712003 wrote:
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, Peter Renolds <prenolds@s...>
>wrote:
>
>
>>Guys,
>>
>>All of these ideas may be viable but they seem to be overly
>>
>>
>complicating
>
>
>>things... I think KISS really applies here. I've had ove two years
>>
>>
>of
>
>
>>trouble free operation of my servo based system and all I use are
>>
>>
>two
>
>
>>$20 175lb gas spring from McMaster Carr one on each side of the
>>
>>
>knee.
>
>
>>I've had two 70lb kurt vices on the table and even with power off,
>>
>>
>the
>
>
>>knee has not moved! Mind you I would never work under the knee
>>
>>
>without
>
>
>>sliding a wooden block to 100% support the dead weight. Just do it.
>>
>>
>..
>
>
>>Happy cnc'ing the knee.
>>
>>Cheers, Peter
>>
>>
>>
>>
>>
>
>
>I've seen your pictures. Are you using a ballscrew for Z, or the
>original ACME screw?
>
>David
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
Discussion Thread
pondindustrial
2004-09-15 13:23:00 UTC
Knee for z-axis control?
Stephen Wille Padnos
2004-09-15 14:30:51 UTC
Re: [CAD_CAM_EDM_DRO] Knee for z-axis control?
R Rogers
2004-09-15 16:12:20 UTC
Re: [CAD_CAM_EDM_DRO] Knee for z-axis control?
Fred Smith
2004-09-15 17:04:51 UTC
Re: Knee for z-axis control?
pondindustrial
2004-09-15 17:39:16 UTC
Re: Knee for z-axis control?
R Rogers
2004-09-15 18:26:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
R Rogers
2004-09-15 18:42:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
Jon Elson
2004-09-15 19:30:43 UTC
Re: [CAD_CAM_EDM_DRO] Knee for z-axis control?
Jon Elson
2004-09-15 19:36:59 UTC
Re: [CAD_CAM_EDM_DRO] Knee for z-axis control?
Stephen Wille Padnos
2004-09-15 19:58:29 UTC
Re: [CAD_CAM_EDM_DRO] Knee for z-axis control?
Peter Renolds
2004-09-15 20:15:24 UTC
Re: [CAD_CAM_EDM_DRO] Knee for z-axis control?
Peter Renolds
2004-09-15 20:47:19 UTC
Re: [CAD_CAM_EDM_DRO] Knee for z-axis control?
Jon Elson
2004-09-15 22:13:50 UTC
Re: [CAD_CAM_EDM_DRO] Knee for z-axis control?
R Rogers
2004-09-16 07:48:14 UTC
Re: [CAD_CAM_EDM_DRO] Knee for z-axis control?
doug98105
2004-09-16 13:28:03 UTC
Re: Knee for z-axis control?
jlsmith269
2004-09-16 14:28:38 UTC
Re: Knee for z-axis control?
Bob Muse
2004-09-16 14:29:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
R Rogers
2004-09-16 15:00:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
doug98105
2004-09-16 16:12:39 UTC
Re: Knee for z-axis control?
metlmunchr
2004-09-16 16:33:14 UTC
Re: Knee for z-axis control?
Peter Renolds
2004-09-16 16:35:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
Larry Wright
2004-09-16 16:59:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
Sven-Åke Larsson
2004-09-17 00:38:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
pondindustrial
2004-09-17 09:29:02 UTC
Re: Knee for z-axis control?
Fred Smith
2004-09-17 09:44:33 UTC
Re: Knee for z-axis control?
R Rogers
2004-09-17 11:42:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
Fred Smith
2004-09-17 12:43:35 UTC
Re: Knee for z-axis control?
R Rogers
2004-09-17 13:11:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
Fred Smith
2004-09-17 14:24:48 UTC
Re: Knee for z-axis control?
R Rogers
2004-09-17 15:03:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
Paul
2004-09-17 16:45:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
pondindustrial
2004-09-17 17:19:03 UTC
Re: Knee for z-axis control?
Brian
2004-09-17 18:04:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
R Rogers
2004-09-17 19:43:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
wanliker@a...
2004-09-17 23:29:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
pondindustrial
2004-09-17 23:49:49 UTC
Re: Knee for z-axis control?
alenou arakar
2004-09-18 06:43:29 UTC
Re: Re: Knee for z-axis control? 4 holes ? and EDM
jlsmith269
2004-09-19 09:43:39 UTC
Re: Knee for z-axis control?
Fred Smith
2004-09-19 10:36:31 UTC
Re: Knee for z-axis control?
Jon Elson
2004-09-19 13:00:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
industrialhobbies
2004-09-21 00:48:03 UTC
Re: Knee for z-axis control?
volitan712003
2004-09-22 17:29:18 UTC
Re: Knee for z-axis control?
turbulatordude
2004-09-22 18:26:12 UTC
Re: Knee for z-axis control? pnuematic actuator
Stephen Wille Padnos
2004-09-22 18:38:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control? pnuematic actuator
Jon Elson
2004-09-22 21:34:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control? pnuematic actuator
R Rogers
2004-09-23 09:25:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
Peter Renolds
2004-09-23 17:43:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
R Rogers
2004-09-23 19:25:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?
volitan712003
2004-09-23 19:27:38 UTC
Re: Knee for z-axis control?
Peter Renolds
2004-09-24 05:24:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Knee for z-axis control?