CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: encoder

Posted by David Paulson
on 2004-09-25 10:10:54 UTC
enc+ --- +5v
enc- ---- GND
phase a -- A
phase b -- B

if the motor runs away when jogged, exchange the A and B


GRautoHP@... wrote:

>WHEN USING GECKO DRIVES THE ENCODER GOES TO ENC-,ENC+,PHASE A,AND PHASE B.
>SO WHAT LEADS FROM MY ENCODER GO WHERE.
>
>
> THANKS FOR EVERYONES HELP!
>
>
>[Non-text portions of this message have been removed]
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>

Discussion Thread

alex 2003-02-18 08:26:47 UTC encoder motorworksnf 2003-09-02 18:23:57 UTC encoder Antonius J.M. Groothuizen 2003-09-02 18:44:35 UTC Re: encoder GRautoHP@a... 2004-09-24 14:39:05 UTC encoder Leslie Watts 2004-09-24 16:24:18 UTC RE: [CAD_CAM_EDM_DRO] encoder caudlet 2004-09-24 16:43:12 UTC Re: encoder GRautoHP@a... 2004-09-25 10:05:43 UTC Re: [CAD_CAM_EDM_DRO] Re: encoder David Paulson 2004-09-25 10:10:54 UTC Re: [CAD_CAM_EDM_DRO] Re: encoder R Rogers 2004-09-25 14:57:45 UTC Re: [CAD_CAM_EDM_DRO] Re: encoder Jon Elson 2004-09-25 16:26:34 UTC Re: [CAD_CAM_EDM_DRO] Re: encoder alphawolf45 2004-09-25 16:49:16 UTC Re: encoder mohamed rashwan 2004-09-25 20:28:15 UTC RE: [CAD_CAM_EDM_DRO] encoder wanliker@a... 2004-09-25 20:37:47 UTC Re: [CAD_CAM_EDM_DRO] encoder R Rogers 2004-09-26 07:33:30 UTC Re: [CAD_CAM_EDM_DRO] Re: encoder GRautoHP@a... 2004-09-26 13:39:25 UTC Re: [CAD_CAM_EDM_DRO] Re: encoder turbulatordude 2004-09-26 18:17:48 UTC PMM8714 5 phase stepper driver chip data sheet ?? mohamed rashwan 2004-09-27 06:27:46 UTC Re: [CAD_CAM_EDM_DRO] PMM8714 5 phase stepper driver chip data sheet ?? turbulatordude 2004-09-27 06:49:57 UTC 5 phase stepper driver deprince eddy 2006-02-19 05:36:37 UTC encoder ebiz_59 2008-04-24 10:13:23 UTC encoder David Speck 2008-04-24 10:20:53 UTC Re: [CAD_CAM_EDM_DRO] encoder Jon Elson 2008-04-24 20:13:14 UTC Re: [CAD_CAM_EDM_DRO] encoder stcnc2000 2008-04-25 07:57:45 UTC Re: encoder Mic 2008-04-25 09:42:28 UTC Re: encoder