Re: [CAD_CAM_EDM_DRO] Re: drive belt idler

Not enough room on the plate. I would have to redo the mounting plate to do
that. May end up doing so but will try idler first.

Thomas

----- Original Message -----
From: "gary_vincent_2001" <gary_vincent_2001@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, October 23, 2004 6:39 PM
Subject: [CAD_CAM_EDM_DRO] Re: drive belt idler


>
>
>
> Why not just reconfigure your two pulleys to make up the differance.
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Thomas Powell" <tppjr@h...>
> wrote:
>> I made the assumption (we all know what happens when one does that)
> that
>> timing belts could be ordered in any length when in actuality there
> are
>> "industry standards" in lengths. Sometimes with a several tooth
> jump in
>> length.
>>
>> With this assumption I made my mounting bracket for my servo
> motor. The
>> belts available in the adjustment range I have are either too small
> or too
>> long. I can redo the mount but don't particularily want to. I was
> thinking
>> of going with the longer belt and adding an idler pulley to take up
> the
>> slack and help keep the longish belt from possible vibration.
>>
>> Now the question. I can't seem to find a smallish idler pulley for
> a HTD
>> 15mm belt. I am looking for about a 1.5" dia pulley. Any ideas?
>>
>> Thanks,
>>
>> Thomas
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>