Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Posted by
Thomas Powell
on 2004-10-25 09:06:03 UTC
Believe me guys have been through the length issues. There are only two
belt lengths available (that I can find) close to what I need. One too
short (pictured) and one too long. I can not go shorter on my mounting
plate design but I can go longer if I have to. I am going to try the longer
with an idler. If that does not work then I will make a longer plate.
There was a comment about not being able to use an idler on a bi-directional
belt. I would like to address that some if anyone has any ideas.
Thomas
belt lengths available (that I can find) close to what I need. One too
short (pictured) and one too long. I can not go shorter on my mounting
plate design but I can go longer if I have to. I am going to try the longer
with an idler. If that does not work then I will make a longer plate.
There was a comment about not being able to use an idler on a bi-directional
belt. I would like to address that some if anyone has any ideas.
Thomas
----- Original Message -----
From: "Andy Wander" <awander@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, October 25, 2004 2:15 AM
Subject: RE: [CAD_CAM_EDM_DRO] Re: drive belt idler
>
> Why do you need a longer belt than the one shown? Looks like shorter would
> be the way to go, if you need to change it at all.
>
> Andy Wander
> Verrex Corporation
>
Discussion Thread
Thomas Powell
2004-10-23 12:47:26 UTC
drive belt idler
bdrmachine
2004-10-23 13:20:01 UTC
Re: drive belt idler
John Dammeyer
2004-10-23 13:28:31 UTC
RE: [CAD_CAM_EDM_DRO] drive belt idler
Thomas Powell
2004-10-23 14:47:47 UTC
Re: [CAD_CAM_EDM_DRO] drive belt idler
Thomas Powell
2004-10-23 14:54:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Brad Eyben
2004-10-23 16:11:42 UTC
Re: [CAD_CAM_EDM_DRO] drive belt idler
gary_vincent_2001
2004-10-23 22:25:29 UTC
Re: drive belt idler
Thomas Powell
2004-10-23 22:54:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
turbulatordude
2004-10-24 05:58:40 UTC
Re: drive belt idler
Peter Renolds
2004-10-24 08:31:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Marv Frankel
2004-10-24 11:16:26 UTC
Re: drive belt idler
Thomas Powell
2004-10-24 12:28:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Thomas Powell
2004-10-24 12:31:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Thomas Powell
2004-10-24 12:31:56 UTC
Re: [CAD_CAM_EDM_DRO] drive belt idler
R Rogers
2004-10-24 19:00:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Thomas Powell
2004-10-24 22:09:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
turbulatordude
2004-10-24 23:11:59 UTC
Re: drive belt idler - cam follower
turbulatordude
2004-10-24 23:35:11 UTC
Re: drive belt idler
Thomas Powell
2004-10-25 00:10:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
turbulatordude
2004-10-25 00:21:29 UTC
Re: drive belt idler
Thomas Powell
2004-10-25 00:23:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Andy Wander
2004-10-25 05:15:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: drive belt idler
Brad Eyben
2004-10-25 05:21:32 UTC
Re: [CAD_CAM_EDM_DRO] drive belt idler
R Rogers
2004-10-25 08:04:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Thomas Powell
2004-10-25 08:54:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Dan Mauch
2004-10-25 09:01:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Thomas Powell
2004-10-25 09:06:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Sven-Åke Larsson
2004-10-25 14:11:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Brian
2004-10-25 15:20:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
Sven-Åke Larsson
2004-10-25 16:31:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler
R Rogers
2004-10-26 07:27:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: drive belt idler