CAD CAM EDM DRO - Yahoo Group Archive

Re: drive belt idler

on 2004-10-24 23:35:11 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Thomas Powell" <tppjr@h...>
wrote:
> I think I have something figured out. Will not know for sure till
I get the
> longer belt in.
>
> Take a look:
>
>
http://imageevent.com/tppjr/rf45dovetailmill/yaxisballscrewconversion



Interesting. I mounted as stepper in such a way as to be on a plate
that had curved slots in it and used a 1/4 inch bolt as the hinge.

If you are doing this on a rotary you are fine. But if you are doing
it by hand, those lines will look awfully out of alignment.

From some printers I have idlers on bearings on a single plate, not a
square. Two holes, one slotted the other as the hinge.

I didn't see a post indicating the belt size you were looking for ?

Dave

Discussion Thread

Thomas Powell 2004-10-23 12:47:26 UTC drive belt idler bdrmachine 2004-10-23 13:20:01 UTC Re: drive belt idler John Dammeyer 2004-10-23 13:28:31 UTC RE: [CAD_CAM_EDM_DRO] drive belt idler Thomas Powell 2004-10-23 14:47:47 UTC Re: [CAD_CAM_EDM_DRO] drive belt idler Thomas Powell 2004-10-23 14:54:10 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Brad Eyben 2004-10-23 16:11:42 UTC Re: [CAD_CAM_EDM_DRO] drive belt idler gary_vincent_2001 2004-10-23 22:25:29 UTC Re: drive belt idler Thomas Powell 2004-10-23 22:54:06 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler turbulatordude 2004-10-24 05:58:40 UTC Re: drive belt idler Peter Renolds 2004-10-24 08:31:47 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Marv Frankel 2004-10-24 11:16:26 UTC Re: drive belt idler Thomas Powell 2004-10-24 12:28:26 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Thomas Powell 2004-10-24 12:31:28 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Thomas Powell 2004-10-24 12:31:56 UTC Re: [CAD_CAM_EDM_DRO] drive belt idler R Rogers 2004-10-24 19:00:03 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Thomas Powell 2004-10-24 22:09:28 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler turbulatordude 2004-10-24 23:11:59 UTC Re: drive belt idler - cam follower turbulatordude 2004-10-24 23:35:11 UTC Re: drive belt idler Thomas Powell 2004-10-25 00:10:07 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler turbulatordude 2004-10-25 00:21:29 UTC Re: drive belt idler Thomas Powell 2004-10-25 00:23:47 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Andy Wander 2004-10-25 05:15:30 UTC RE: [CAD_CAM_EDM_DRO] Re: drive belt idler Brad Eyben 2004-10-25 05:21:32 UTC Re: [CAD_CAM_EDM_DRO] drive belt idler R Rogers 2004-10-25 08:04:50 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Thomas Powell 2004-10-25 08:54:44 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Dan Mauch 2004-10-25 09:01:17 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Thomas Powell 2004-10-25 09:06:03 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Sven-Åke Larsson 2004-10-25 14:11:04 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Brian 2004-10-25 15:20:03 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Sven-Åke Larsson 2004-10-25 16:31:12 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler R Rogers 2004-10-26 07:27:52 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler