CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: drive belt idler

Posted by Thomas Powell
on 2004-10-24 12:31:28 UTC
Marv,

Thanks, I have dug around my "stuff" and think I have found something that
will work. Much like those at McMaster.

Thanks,

Thomas
----- Original Message -----
From: "Marv Frankel" <Dcdziner@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, October 24, 2004 8:16 AM
Subject: [CAD_CAM_EDM_DRO] Re: drive belt idler


>
>
> Tom,
> Just do a search for cam followers at www.mcmaster.com and find
> the size cam follower, with the bearings to fit your need. Then, all
> you need to do is mill a slotted hole in the back plate, and bolt the
> cam follower stud in place.
>
> Marv Frankel
> Los Angeles
>
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Thomas Powell" <tppjr@h...>
> wrote:
>> I made the assumption (we all know what happens when one does that)
> that
>> timing belts could be ordered in any length when in actuality there
> are
>> "industry standards" in lengths. Sometimes with a several tooth
> jump in
>> length.
>>
>> With this assumption I made my mounting bracket for my servo
> motor. The
>> belts available in the adjustment range I have are either too small
> or too
>> long. I can redo the mount but don't particularily want to. I was
> thinking
>> of going with the longer belt and adding an idler pulley to take up
> the
>> slack and help keep the longish belt from possible vibration.
>>
>> Now the question. I can't seem to find a smallish idler pulley for
> a HTD
>> 15mm belt. I am looking for about a 1.5" dia pulley. Any ideas?
>>
>> Thanks,
>>
>> Thomas
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

Discussion Thread

Thomas Powell 2004-10-23 12:47:26 UTC drive belt idler bdrmachine 2004-10-23 13:20:01 UTC Re: drive belt idler John Dammeyer 2004-10-23 13:28:31 UTC RE: [CAD_CAM_EDM_DRO] drive belt idler Thomas Powell 2004-10-23 14:47:47 UTC Re: [CAD_CAM_EDM_DRO] drive belt idler Thomas Powell 2004-10-23 14:54:10 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Brad Eyben 2004-10-23 16:11:42 UTC Re: [CAD_CAM_EDM_DRO] drive belt idler gary_vincent_2001 2004-10-23 22:25:29 UTC Re: drive belt idler Thomas Powell 2004-10-23 22:54:06 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler turbulatordude 2004-10-24 05:58:40 UTC Re: drive belt idler Peter Renolds 2004-10-24 08:31:47 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Marv Frankel 2004-10-24 11:16:26 UTC Re: drive belt idler Thomas Powell 2004-10-24 12:28:26 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Thomas Powell 2004-10-24 12:31:28 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Thomas Powell 2004-10-24 12:31:56 UTC Re: [CAD_CAM_EDM_DRO] drive belt idler R Rogers 2004-10-24 19:00:03 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Thomas Powell 2004-10-24 22:09:28 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler turbulatordude 2004-10-24 23:11:59 UTC Re: drive belt idler - cam follower turbulatordude 2004-10-24 23:35:11 UTC Re: drive belt idler Thomas Powell 2004-10-25 00:10:07 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler turbulatordude 2004-10-25 00:21:29 UTC Re: drive belt idler Thomas Powell 2004-10-25 00:23:47 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Andy Wander 2004-10-25 05:15:30 UTC RE: [CAD_CAM_EDM_DRO] Re: drive belt idler Brad Eyben 2004-10-25 05:21:32 UTC Re: [CAD_CAM_EDM_DRO] drive belt idler R Rogers 2004-10-25 08:04:50 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Thomas Powell 2004-10-25 08:54:44 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Dan Mauch 2004-10-25 09:01:17 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Thomas Powell 2004-10-25 09:06:03 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Sven-Åke Larsson 2004-10-25 14:11:04 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Brian 2004-10-25 15:20:03 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler Sven-Åke Larsson 2004-10-25 16:31:12 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler R Rogers 2004-10-26 07:27:52 UTC Re: [CAD_CAM_EDM_DRO] Re: drive belt idler