Re: [CAD_CAM_EDM_DRO] Re: drive belt idler

I am using 2:1, 22 and 44 tooth pullies. Already have them and modified
them to work. What is wrong with the idler pulley? If it does not work out
I will just have to redo the mounting plate to make it longer..

Thomas

----- Original Message -----
From: "turbulatordude" <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, October 24, 2004 9:21 PM
Subject: [CAD_CAM_EDM_DRO] Re: drive belt idler


>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Thomas Powell" <tppjr@h...>
> wrote:
>> The motor plate is slotted and adjustable but only about 1/4".
> There are
>> two belts lengths close to what I need, 134 and 142 toothed. The
> 134 is
>> .45" too short and the 142 is .33" to long. I am going to get the
> 142 and
>> take up the slack with the idler pulley. I am using HTD 15 mm
> belts.
>>
>> Thomas
>
> What would happen if you increased the pully dia to make the
> difference ?
>
> and, btw, if you wanna use a 16 and a 72 pully combination, add the
> idlers to wrap the pully around the small gear.
>
> Dave
>
>
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>