Re: Huh, wanted Gcode files...??????
Posted by
doug98105
on 2004-12-13 13:18:03 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "john labutski" <kd6wd@c...>
wrote:
Rather than sarcasm, my question was surprise. If the request had
been for a CAD file to acquire the dimensions that'd be one thing.
But a Gcode file might carry with it controller specific
instructions and might require cutter radius comp which all controls
don't have. The code might use absolute I,J or incremental I,J, so
the user's control would have to be the same as the original
programmer's. Plus, it would require the user to have the same size
end mill that the pocketing portion of the code was written for.
In short, it seems to me the code could be useless unless it was to
be run on an identical setup as it was written for.
Would you run someone else's code on your machine if you didn't know
how to program?
wrote:
> Hello Doug,however,
>
> BTW I am not the one who requested the db cutout gcode. I did
> detect a bit of sarcasm in your comment. Personally I saw this asa
> reasonable request. If someone is only going to do this once ortwice why
> spend the time to do it if someone else has good code and iswilling to
> share it. Since few if any of us are in business and compete witheach
> other I don't see any harm in it.Hello John,
>
Rather than sarcasm, my question was surprise. If the request had
been for a CAD file to acquire the dimensions that'd be one thing.
But a Gcode file might carry with it controller specific
instructions and might require cutter radius comp which all controls
don't have. The code might use absolute I,J or incremental I,J, so
the user's control would have to be the same as the original
programmer's. Plus, it would require the user to have the same size
end mill that the pocketing portion of the code was written for.
In short, it seems to me the code could be useless unless it was to
be run on an identical setup as it was written for.
Would you run someone else's code on your machine if you didn't know
how to program?
Discussion Thread
doug98105
2004-12-13 09:08:02 UTC
Huh, wanted Gcode files...??????
john labutski
2004-12-13 09:54:06 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
Alan Marconett
2004-12-13 11:29:49 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
Alan Marconett
2004-12-13 11:48:39 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
Wayne
2004-12-13 12:14:58 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
Kim Lux
2004-12-13 12:24:35 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
Dan Mauch
2004-12-13 12:40:19 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
Kim Lux
2004-12-13 12:58:23 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
john labutski
2004-12-13 13:15:37 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
Jeff Jones
2004-12-13 13:17:41 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
doug98105
2004-12-13 13:18:03 UTC
Re: Huh, wanted Gcode files...??????
A. G. Eckstein
2004-12-13 13:55:02 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
A. G. Eckstein
2004-12-13 13:58:57 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
David A. Frantz
2004-12-13 14:53:19 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
David A. Frantz
2004-12-13 15:03:09 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
kdoney_63021
2004-12-13 16:43:20 UTC
Re: Huh, wanted Gcode files...??????
Ron Kline
2004-12-13 16:54:20 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
Alan Marconett
2004-12-13 17:14:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Huh, wanted Gcode files...??????
Kim Lux
2004-12-13 19:43:25 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
Kim Lux
2004-12-13 19:44:14 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????
Stephen Wille Padnos
2004-12-13 20:46:58 UTC
Re: [CAD_CAM_EDM_DRO] Huh, wanted Gcode files...??????