CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] LCD hack help

Posted by Jon Elson
on 2000-05-22 22:55:56 UTC
"Derek B." wrote:

>
>
> Hi Ron,
>
> I found a 4" color lcd monitor in the Jameco catalog Pg 127.
> Misc specs as follows:
> 4.1"l x 3.3"w x .7h
> NTSC Format
> price 149.95
> has backlight
> TFT color lcd
> part # 172742
> hope this helps.

Here's the important info : ** NTSC Format **
That means it is a VIDEO monitor, as in TV, not a computer
monitor. If you can convert your VGA signals into TV
format, it would 'work'. But, I'm afraid you wouldn't
be able to read any small text. Probably you could read
the big position numbers in EMC and other DRO/CNC
programs, but you'd be giving up A LOT, especially on a
4" display.

Jon

Discussion Thread

Ron Ginger 2000-05-22 06:50:56 UTC Re: [CAD_CAM_EDM_DRO] LCD hack help Bertho Boman 2000-05-22 06:58:09 UTC Re: [CAD_CAM_EDM_DRO] LCD hack help D.F.S. 2000-05-22 08:46:05 UTC Re: [CAD_CAM_EDM_DRO] LCD hack help D.F.S. 2000-05-22 10:00:22 UTC Re: [CAD_CAM_EDM_DRO] NEW conversion project.... Jon Elson 2000-05-22 14:11:03 UTC Re: [CAD_CAM_EDM_DRO] NEW conversion project.... Jon Elson 2000-05-22 14:30:36 UTC Re: [CAD_CAM_EDM_DRO] LCD hack help Jon Elson 2000-05-22 14:50:57 UTC Re: [CAD_CAM_EDM_DRO] LCD hack help Steve Carlisle 2000-05-22 15:31:52 UTC Re: [CAD_CAM_EDM_DRO] LCD hack help D.F.S. 2000-05-22 15:36:24 UTC Re: [CAD_CAM_EDM_DRO] NEW conversion project.... Derek B. 2000-05-22 18:03:48 UTC Re: [CAD_CAM_EDM_DRO] LCD hack help Jon Elson 2000-05-22 22:55:56 UTC Re: [CAD_CAM_EDM_DRO] LCD hack help bfp 2000-05-22 23:32:14 UTC Re: [CAD_CAM_EDM_DRO] LCD hack help John Ross 2000-05-23 10:37:11 UTC RE: [CAD_CAM_EDM_DRO] LCD hack help Jon Elson 2000-05-23 11:35:54 UTC Re: [CAD_CAM_EDM_DRO] LCD hack help Ron Ginger 2000-05-23 12:55:35 UTC Re: [CAD_CAM_EDM_DRO] LCD hack help