RE: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)

Dick, who wrote the original article, used a Harbor Freight at $20 and
already had a big aircompresser. The tool was designed for those once or
twice in a lifetime needs. I looked at it closely for CNC use, but on a
practical level, its life would be short.

Dennis in Houston

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Hugh Prescott
Sent: Saturday, April 16, 2005 12:13 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a
dremel :)


Home Despot has these in the Husky brand of tools for about $45 and Enco has
their house brand for $30.

I read the label thinking that I could side mount this to the spindle of my
B'port to drill PCBs and I think they took about 3 CFM at 90, wonder if the
decimal point was missing or lightly printed.

Hugh




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links