Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)

I have one of these I clamp in my lathe to regrind the jaws on my 3 jaw
chuck , it uses so much air that I can only run it for 1 minute and then
have to stop for 2 to 3 minutes for my 3 hp. compressor to catch up again !
In short it EATS air !
Mine was from Harbor Freight $70 about 4 years ago it might be a better
brand would be better made and use less air .

Ron K


Hugh Prescott wrote:

>Home Despot has these in the Husky brand of tools for about $45 and Enco has
>their house brand for $30.
>
>I read the label thinking that I could side mount this to the spindle of my
>B'port to drill PCBs and I think they took about 3 CFM at 90, wonder if the
>decimal point was missing or lightly printed.
>
>Hugh
>
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>

--
Ron Kline

American Precision Ceramics