Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
Posted by
JanRwl@A...
on 2005-04-23 15:53:08 UTC
Don't forget, if you want this spindle, you must have a 300-400 Hz 3-phase
source of power for it! I did a Perske machine in '85, and the
motor-generator cost MUCH more than the spindle it powered! Fine noisy stuff, though!
(Their engineers need to learn about aerodynamics and the sensible design of
cooling-fans!!!)
[Non-text portions of this message have been removed]
source of power for it! I did a Perske machine in '85, and the
motor-generator cost MUCH more than the spindle it powered! Fine noisy stuff, though!
(Their engineers need to learn about aerodynamics and the sensible design of
cooling-fans!!!)
[Non-text portions of this message have been removed]
Discussion Thread
turbulatordude
2005-04-16 06:00:04 UTC
Rack and Pinion
R Rogers
2005-04-16 06:21:37 UTC
Re: [CAD_CAM_EDM_DRO] Rack and Pinion
Stephen Wille Padnos
2005-04-16 06:38:32 UTC
Re: [CAD_CAM_EDM_DRO] Rack and Pinion
turbulatordude
2005-04-16 07:14:50 UTC
Re: Rack and Pinion
turbulatordude
2005-04-16 07:18:12 UTC
Re: Rack and Pinion
Abby Katt
2005-04-16 07:39:38 UTC
Cheap 56,000RPM milling upgrade (not a dremel :)
ballendo
2005-04-16 07:47:39 UTC
DIY-CNC Machine reality 101 was Re: Rack and Pinion
Abby Katt
2005-04-16 07:51:11 UTC
RE: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
cdmurphy_2000
2005-04-16 08:23:34 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-16 09:11:33 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
Roy J. Tellason
2005-04-16 09:41:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Hugh Prescott
2005-04-16 10:10:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
D Cranston
2005-04-16 10:23:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Ron Kline
2005-04-16 10:45:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
R Rogers
2005-04-16 11:03:22 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-16 11:07:09 UTC
Cheap 56,000RPM milling upgrade (not a dremel :)
Abby Katt
2005-04-16 13:34:55 UTC
RE: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-16 14:06:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-16 15:19:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: RE: Cheap 56,000RPM milling upgrade (not a dremel :)
Russ Waters
2005-04-16 16:16:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: RE: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-16 22:59:03 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
apaulsalerno
2005-04-17 17:59:12 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Lloyd Leung
2005-04-17 18:14:19 UTC
RE: Cheap 56,000RPM milling upgrade (not a dremel :)
Pete Brown (YahooGroups)
2005-04-17 18:23:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Andrey Lipavsky
2005-04-17 18:26:13 UTC
RE: [CAD_CAM_EDM_DRO] RE: Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-17 22:33:27 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-17 22:56:37 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-17 23:58:42 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
turbulatordude
2005-04-18 06:10:07 UTC
Re: Rack and Pinion - Where to buy ?
cnc_4_me
2005-04-18 08:25:26 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Pete Brown (YahooGroups)
2005-04-18 08:31:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Ron Kline
2005-04-18 09:34:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-18 10:04:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
cnc_4_me
2005-04-18 10:35:43 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-18 19:36:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
apaulsalerno
2005-04-18 21:36:06 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
cnc_4_me
2005-04-20 20:50:40 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-20 22:45:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Bill P @ ...
2005-04-23 14:33:18 UTC
Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
Brian
2005-04-23 15:33:24 UTC
Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
JanRwl@A...
2005-04-23 15:53:08 UTC
Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
Jon Elson
2005-04-23 20:24:50 UTC
Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
JanRwl@A...
2005-04-23 22:34:03 UTC
Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
Dave Fisher
2005-04-24 02:04:36 UTC
RE: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade