RE: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
Posted by
Dave Fisher
on 2005-04-24 02:04:36 UTC
Looks like n older model - don't know how the bearings would perform over
24,000 rpm.
Dave
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Jon Elson
Sent: 24 April 2005 04:21
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K
rpm upgrade
JanRwl@... wrote:
frequency.
You generally need series inductors (reactors in that trade) for the VFD to
run properly. A number of VFDs can now go to 400 Hz, which will get you
24,000 RPM. If you want 54,000 RPM you need about 950 Hz.
AC Tech makes a special model that will go to 1000 Hz.
Jon
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators] URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
24,000 rpm.
Dave
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Jon Elson
Sent: 24 April 2005 04:21
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K
rpm upgrade
JanRwl@... wrote:
>Don't forget, if you want this spindle, you must have a 300-400 Hzstuff, though!
>3-phase source of power for it! I did a Perske machine in '85, and the
>motor-generator cost MUCH more than the spindle it powered! Fine noisy
>If it is 3-phase, you can run it off a modern VFD that goes that high in
>
frequency.
You generally need series inductors (reactors in that trade) for the VFD to
run properly. A number of VFDs can now go to 400 Hz, which will get you
24,000 RPM. If you want 54,000 RPM you need about 950 Hz.
AC Tech makes a special model that will go to 1000 Hz.
Jon
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators] URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
turbulatordude
2005-04-16 06:00:04 UTC
Rack and Pinion
R Rogers
2005-04-16 06:21:37 UTC
Re: [CAD_CAM_EDM_DRO] Rack and Pinion
Stephen Wille Padnos
2005-04-16 06:38:32 UTC
Re: [CAD_CAM_EDM_DRO] Rack and Pinion
turbulatordude
2005-04-16 07:14:50 UTC
Re: Rack and Pinion
turbulatordude
2005-04-16 07:18:12 UTC
Re: Rack and Pinion
Abby Katt
2005-04-16 07:39:38 UTC
Cheap 56,000RPM milling upgrade (not a dremel :)
ballendo
2005-04-16 07:47:39 UTC
DIY-CNC Machine reality 101 was Re: Rack and Pinion
Abby Katt
2005-04-16 07:51:11 UTC
RE: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
cdmurphy_2000
2005-04-16 08:23:34 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-16 09:11:33 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
Roy J. Tellason
2005-04-16 09:41:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Hugh Prescott
2005-04-16 10:10:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
D Cranston
2005-04-16 10:23:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Ron Kline
2005-04-16 10:45:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
R Rogers
2005-04-16 11:03:22 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-16 11:07:09 UTC
Cheap 56,000RPM milling upgrade (not a dremel :)
Abby Katt
2005-04-16 13:34:55 UTC
RE: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-16 14:06:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-16 15:19:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: RE: Cheap 56,000RPM milling upgrade (not a dremel :)
Russ Waters
2005-04-16 16:16:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: RE: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-16 22:59:03 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
apaulsalerno
2005-04-17 17:59:12 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Lloyd Leung
2005-04-17 18:14:19 UTC
RE: Cheap 56,000RPM milling upgrade (not a dremel :)
Pete Brown (YahooGroups)
2005-04-17 18:23:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Andrey Lipavsky
2005-04-17 18:26:13 UTC
RE: [CAD_CAM_EDM_DRO] RE: Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-17 22:33:27 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-17 22:56:37 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-17 23:58:42 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
turbulatordude
2005-04-18 06:10:07 UTC
Re: Rack and Pinion - Where to buy ?
cnc_4_me
2005-04-18 08:25:26 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Pete Brown (YahooGroups)
2005-04-18 08:31:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Ron Kline
2005-04-18 09:34:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-18 10:04:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
cnc_4_me
2005-04-18 10:35:43 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-18 19:36:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
apaulsalerno
2005-04-18 21:36:06 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
cnc_4_me
2005-04-20 20:50:40 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-20 22:45:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Bill P @ ...
2005-04-23 14:33:18 UTC
Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
Brian
2005-04-23 15:33:24 UTC
Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
JanRwl@A...
2005-04-23 15:53:08 UTC
Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
Jon Elson
2005-04-23 20:24:50 UTC
Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
JanRwl@A...
2005-04-23 22:34:03 UTC
Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
Dave Fisher
2005-04-24 02:04:36 UTC
RE: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade