RE: [CAD_CAM_EDM_DRO] RE: Cheap 56,000RPM milling upgrade (not a dremel :)
Posted by
Andrey Lipavsky
on 2005-04-17 18:26:13 UTC
ITEM 47869-2VGA and 47869-1JMA come up as the same item title and
description. They're both $15
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Lloyd Leung
Sent: Sunday, April 17, 2005 8:14 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] RE: Cheap 56,000RPM milling upgrade (not a dremel
:)
ITEM 47869-2VGA - $14.99
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of apaulsalerno
Sent: Sunday, April 17, 2005 8:59 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Im on my second Harbor Freight micro grinder. It only uses 2 CFM at
full output. The first one lasted a couple of years doing things no
human should have to bear witness too. I like em just fine. As soon
as I find an adequate piece of 3/8" tubing I'll give it a try. It
sounds like its perfect for light engraving. Theyre 40.00 on line
but 47869-1JMA is the 19.99 price. They have a 20 piece diamond tip
1/8" engraving set for 3.99 right now also (#30165-0JMA).
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
description. They're both $15
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Lloyd Leung
Sent: Sunday, April 17, 2005 8:14 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] RE: Cheap 56,000RPM milling upgrade (not a dremel
:)
ITEM 47869-2VGA - $14.99
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of apaulsalerno
Sent: Sunday, April 17, 2005 8:59 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Im on my second Harbor Freight micro grinder. It only uses 2 CFM at
full output. The first one lasted a couple of years doing things no
human should have to bear witness too. I like em just fine. As soon
as I find an adequate piece of 3/8" tubing I'll give it a try. It
sounds like its perfect for light engraving. Theyre 40.00 on line
but 47869-1JMA is the 19.99 price. They have a 20 piece diamond tip
1/8" engraving set for 3.99 right now also (#30165-0JMA).
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
turbulatordude
2005-04-16 06:00:04 UTC
Rack and Pinion
R Rogers
2005-04-16 06:21:37 UTC
Re: [CAD_CAM_EDM_DRO] Rack and Pinion
Stephen Wille Padnos
2005-04-16 06:38:32 UTC
Re: [CAD_CAM_EDM_DRO] Rack and Pinion
turbulatordude
2005-04-16 07:14:50 UTC
Re: Rack and Pinion
turbulatordude
2005-04-16 07:18:12 UTC
Re: Rack and Pinion
Abby Katt
2005-04-16 07:39:38 UTC
Cheap 56,000RPM milling upgrade (not a dremel :)
ballendo
2005-04-16 07:47:39 UTC
DIY-CNC Machine reality 101 was Re: Rack and Pinion
Abby Katt
2005-04-16 07:51:11 UTC
RE: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
cdmurphy_2000
2005-04-16 08:23:34 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-16 09:11:33 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
Roy J. Tellason
2005-04-16 09:41:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Hugh Prescott
2005-04-16 10:10:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
D Cranston
2005-04-16 10:23:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Ron Kline
2005-04-16 10:45:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
R Rogers
2005-04-16 11:03:22 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-16 11:07:09 UTC
Cheap 56,000RPM milling upgrade (not a dremel :)
Abby Katt
2005-04-16 13:34:55 UTC
RE: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-16 14:06:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-16 15:19:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: RE: Cheap 56,000RPM milling upgrade (not a dremel :)
Russ Waters
2005-04-16 16:16:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: RE: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-16 22:59:03 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
apaulsalerno
2005-04-17 17:59:12 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Lloyd Leung
2005-04-17 18:14:19 UTC
RE: Cheap 56,000RPM milling upgrade (not a dremel :)
Pete Brown (YahooGroups)
2005-04-17 18:23:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Andrey Lipavsky
2005-04-17 18:26:13 UTC
RE: [CAD_CAM_EDM_DRO] RE: Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-17 22:33:27 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-17 22:56:37 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
JanRwl@A...
2005-04-17 23:58:42 UTC
Re: [CAD_CAM_EDM_DRO] Cheap 56,000RPM milling upgrade (not a dremel :)
turbulatordude
2005-04-18 06:10:07 UTC
Re: Rack and Pinion - Where to buy ?
cnc_4_me
2005-04-18 08:25:26 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Pete Brown (YahooGroups)
2005-04-18 08:31:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Ron Kline
2005-04-18 09:34:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-18 10:04:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
cnc_4_me
2005-04-18 10:35:43 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-18 19:36:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
apaulsalerno
2005-04-18 21:36:06 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
cnc_4_me
2005-04-20 20:50:40 UTC
Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Jon Elson
2005-04-20 22:45:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cheap 56,000RPM milling upgrade (not a dremel :)
Bill P @ ...
2005-04-23 14:33:18 UTC
Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
Brian
2005-04-23 15:33:24 UTC
Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
JanRwl@A...
2005-04-23 15:53:08 UTC
Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
Jon Elson
2005-04-23 20:24:50 UTC
Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
JanRwl@A...
2005-04-23 22:34:03 UTC
Re: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade
Dave Fisher
2005-04-24 02:04:36 UTC
RE: [CAD_CAM_EDM_DRO] Rebuilt 3HP Perske on eBay, was: Cheap 56K rpm upgrade